Weld Draglites or Dragstars
 

anyone know which lug pattern of either of these wheels will fit on an rx7? cause they are only listed in standard not metric. i have seen some drag rx7s have them, but i dont know if they are running the stock rear end or what. thanks..

5 on 114.3mm = 5 on 4.5".

Hope that helps. Just remember 25.4mm = 1"

I'll have to check into fitments later.

Rishie

Just look for offsets now.

thats exactly what i needed. thanks a bunch.

lugs?
 

What about the lugs. I just bought some draglites and they came with a special lug, of course they weren't the right size. Anyone know the correct lug size and best place to get them?

Some draglites are universal. My dad had a pair on his chevy that was universal.

weld wheels require a shank style lug nut. You'll most likely need a 12/1.25 with a .500 deep shank.

Atleast that's what mine take.

like I said before, mine fit great

http://img.photobucket.com/albums/v2...m/DSC02875.jpg

Air supply

Which wheels are those exactly? Do the fronts fit without spacers?

What size of tires and wheels are those in the picture Airsupply ?
Thanks to let me know

FRONT,

Magnum Drag 2.0 - 786 Series Wheel
15'' x 3-1/2''
1-3/4'' Rear Spacing
1-Piece Wheel
Gold Anodized
9 LBS
W/Mickey Thompson Sportman Tires

BACK,

Magnum Drag 2.0 - 786 Series Wheel
15'' x 10''
6'' Rear Spacing
2-Piece Wheel
Polished with Gold Anodized Center
11.18 lbs.

AirSupply- your PM's are disabled

************************************************** ************
I assume you have these on an FD?

What size are the rear tires?

Approx how much are the rims?

If you are running a 28" tall tire out back (what width) and what mods did you need to get them to fit?

ie grinding on brake caliper bolts etc.

Thanks,

Mark

On a FD.

450-500 each.

26' tire. Rear wheels are 10 inch wide. Front wheels are 3.5 inches wide.

I'm running that 8.8 solid axle in the back with wilwood brakes so it's not exactly stock. I've also got wider quarter panels too.