Was told 9 inch is too wide!
 

I was told that i can not fit 9" wheels on the rear of my FC TII. But there are guys running 10's on the rear. What Gives?

If i get 9" on the rear what offset would be best without it rubbing? :confused:

So not true. Look for a +35-38 offset and you'll be great. Or you can just contact me and I'll help find you some wheels and shave some dollars off your purchase.

Rishie

I have RX7 magazine with a FC with 11's in the rear running 315's rear and 275 fronts.

yeah...with a widebody kit im assuming.

I get told that all the time ;)

Well DAMN 9 inches wide? She is going to BURST!

Thanks guys, I'm going to stick with the 9" no matter what needs to be done to the guards. Mgiht even go wider
:p:

Well you'll run into issues over 9.5" in width, without rolling fenders. But there's room to play. Just tub the rear. hehe.

Rishie

I have the biggest you can reasonably fit on a stock FC. 17x7.5f 17x9r. Not sure of the offsets...

Reasonably you can fit an 8" up front and a 9.5 in the rear with the heat shields removed from the muffler cans. Hehe, I guess I have the biggest. 225 up front and 265 in the rear. I know guys with 275's but we're talking rim width.

There's a lot of other guys with these fitments too.

Rishie