race tires and wheels arrived!
5 Attachment(s)
Hoosier A6's and Volk CE28s for autox. The Volks in 17 X 9 are 14lbs on my scale...about 5lbs lighter than my HRE 540s at 17 X 8.5! Coupled with the Hoosiers that are 21lbs, and that's a savings of 10-11 pounds at each corner! Nice reduction in unsprung weight! Looking forward to putting them in action :-)
|
On your FD? I wasn't aware that the CE28N was available in a 9" width with offsets for the FD.
Nice wheels and tires. :) |
Looks good. What offsets?
|
WOW I didn't realize that the CE28Ns were that light!
|
Nice, just seem a bit too fragile to me.
|
thanks for the compliments. Offsets are +40. I didnt think they were this light either...they're 1/2 pound heavier than the early, non-reinforced stock FD wheels
|
who/where do you ax in NJ? i'm going to giants stadium sept 9 and 15 with www.motorsportsne.com if you wanna go. sweet setup. why only 245's on the 9 inch wheel? and curious what you think of the v710's vs your hoosiers.
|
Originally Posted by 2MCHPWR
why only 245's on the 9 inch wheel? and curious what you think of the v710's vs your hoosiers.
Originally Posted by DJF(NJ)
Offsets are +40
|
Originally Posted by 2MCHPWR
who/where do you ax in NJ? i'm going to giants stadium sept 9 and 15 with www.motorsportsne.com if you wanna go. sweet setup. why only 245's on the 9 inch wheel? and curious what you think of the v710's vs your hoosiers.
|
Originally Posted by rynberg
Hoosiers are wider than street tires in the same size.
I hope you have rolled your fenders up front. |
cool. i know a lot of the scca guys at etown but i never race there because they always have way too many competitors (6 runs), the lots break up a lot, and the courses are usually very tight, tire killers. i'll try to meet up with you there in oct though.
which shop you taking your car to for corner weighting? that porsche place (can't remember the name offhand). |
Originally Posted by 2MCHPWR
cool. i know a lot of the scca guys at etown but i never race there because they always have way too many competitors (6 runs), the lots break up a lot, and the courses are usually very tight, tire killers. i'll try to meet up with you there in oct though.
which shop you taking your car to for corner weighting? that porsche place (can't remember the name offhand). |
yes bodymotion is good and expensive. my friend is mgr at sears auto in new brunswick and he does my alignments, tire mounting, etc.
considering you are coming from street tires to hoosiers, i bet you won't be second to last next event. kick ass and good luck. what hp and suspension mods you got? |
All times are GMT -5. The time now is 10:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands