Question regarding to 18X11+30 with 295 tyres
Just got my new wheels and tyres, Hankook Z221 295/30/18 and 18x11+30 wheels
Wondering if those will fit the stock fenders, the car now have 2 fingers gap to the fender lip. Is it possible at all to roll and pull guards out so the wheels wont rub, or do I really need wide fenders to fit my wheels. Thank you guys:nod: |
I run 18x11 +45 with 295/30-18 front and rear.
Front fenders rolled with moderate pull. Rear fenders partially/lightly rolled. -2.4 deg front camber -1.3 deg rear camber. Your wheel/tire will stick out 15mm further. You can run a 30mm narrower tire (165/35-18) and fit with the same mods I have so just the wheel is sticking out. You can add +30mm front and rear fenders and run just -1 deg front camber and -0.3 deg rear camber (more stock). Here is my car on the same 295/30-18 Hankook TD Z221 https://cimg8.ibsrv.net/gimg/www.rx7...4b031b989f.jpg |
Thank you so much for the info :)
|
dialing your camber settings will be key for that wide in the front
|
Right....
He could just run 7 degrees front camber to tuck the 18x11 +30 295s :lol: |
All times are GMT -5. The time now is 01:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands