Got my new fenders on tonight. These are stock fenders that have been modified with a lip to make them match the rears. They don't match perfectly, but at least they're close. And my buddy Kingston is in a couple of these pics too. And of the course the last shot was just for him haha.

 

Thanks... hehe new pics...

 

Great looking car. What are the wheels specs and tire size?

 

These are Forgestar CF5 18x10 +50 with gun metal powder coat
Tires are Hoosier 285/18/30 A6

These wheels are available i custom offset up to +50, varies with rim size.

Talk to Rishie for a deal on these.

 

^Looks good! I like the front splitter too!

 

love those wheels..... how much did they run for a set?

 

Forgestars are affordable and they look good. Also you can get them in almost any offset. One of the reasons I didn't go with them was the horror stories I've heard about their delivery times. However this shouldn't be a problem if you buy them from Rishie as he may be able to push the manufacturer to deliver on time.

 

im going to go a bit off topic, but im curious with that spoiler/wing you have on. What is it??? got any other pics of it?

 

19x9 front 19x12 rear Chips forged wheels


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us

 

too amazing chip, def would like to see it lower.. but ur engine makes up for it lol

 

Would have loved to see some more concavity in the front, but love the craftsmanship and attention to detail.

 

Autocross Setup:

Enkei RPF1 17X9 +45mm 255/40/17 Dunlop Star Specs On all 4 corners



Street/Show Setup:

5Zigen FN01R-C 18X9.5 + 45mm 275/35/18 Rear, 18X8.5 +38mm 255/35/18 Front



Drag Setup:

Stock Wheels & Spares 26X10.5 M/T ET Streets Rear, 26X5.0 Coker Excelsior

 

Ask Rishie - they are comparable to Enkei in price.

 

No, I don't think Rishie can get them any faster.

They say it will take 4-6 weeks.

It will take 6.

 

More on the splitter and wing.

Here's some pics getting it fitted:
Splitter by afgmoto1978

The wing elements are APR CF dual wing elements. Talk to Rick Jung at Ciro design if interested, you can't get them from APR anymore.

The wing mount/endplates are also by afgmoto1978 - 3/16" hydro formed aluminum. The mounts are bolted to the chassis, not to the hatch.
Wingmounts by afgmoto1978

Click on my username for a pic of the whole car.

 

Ahhhhhhhhh ****!!!! those brackets are sooooo sick!!! thats an awesome idea, great job with that wing sir, my hat is off to you!

 

nice concave face on the gold RE fd

 

mattster03 ?!? ur drag setup is 26x10.5?? lol
jk i know its a mistype but funny

 

thats an awesome idea!

plus u can take it off and not have to plug up the holes in the hatch.
its convertable.
i like it

 

It does require cutting about 1/8" off the hatch edge for about 10 inches.

It almost clears with the stock gap, but not quite.

 

My favorite kit for the front of an fd. You got enough rear tire under there?

 

True that, it does look like a 4x4 .. When i ordered tires for it, I did not look at the height of the rear tire, 27 inch(nitto NT5) lol.. So Michelin Pilot Sport PS2 will do the trick at only 25 inch high +lowering the car. It will get the look i'm after.
That rear tire just has to much side wall meet for a 35 series ..

 

i really love those wheels, and i was curious what they would look like on my car in their sapphire blue color...hope you dont mind, i photoshopped your pic to get an idea.

looks badass IMO... i might get these instead of gold wheels next.

 

gonna need it when u smash the throttle on this bad boy

awesome car! how much more u got left?

 

Put some 8mm that I had laying around on the front wheels to see what it would look like. I like it, but it does rub a little bit haha. I have some 5mm spacers I'm going to try next.

So right now, the rear fitment is 18x10.5 +22 (with 10mm spacer, so +12) and front is 18x9.5 +22 (with 8mm so +14).