The Official FC Wheel Fitment Thread
hello all need some help here. 20mm front fenders 30mm rears.
17x9 or 9.5 front ? offset
17x10 rears ? offset
which width in the front would be better also im looking for flush offsets.
17x9 or 9.5 front ? offset
17x10 rears ? offset
which width in the front would be better also im looking for flush offsets.
Joined: May 2005
Posts: 2,745
Likes: 0
From: North Bay, Ontario
and a 17 x 10 +15-0 offset rear on 10" wheel and 275/40R17.
What kind of wheels? Are you looking for stretch-o-drift-tyte fitment or grip fitment?
Drift Ready FC
Joined: Apr 2009
Posts: 92
Likes: 0
From: Redlands, Ca
205 is a baby stretch on a 8.5 have you looked? Its better to have a little stretch on the front to contour to the finder there is not a lot of room to roll it. I'm contemplating 10s all around, now thats something to calculate poindexter. You'll be fine... Most people think that if they do even the lightest stretch there tire is going to fall of. and a 225 on a 8.5? I think your going to need to roll your fender ether way. Plus I thought that wheel fitment (in general) was to get rid of the wheel gap from the stock rims to shape out the car.
I am about to buy some new rims and i was wondering if i would be able to fit 17x10 +20, or 17X10.5 +27 all the way around, i will have shine wide fenders and pull in the rear or would i need spacers to fit?
thanks
thanks
and with the spacers they will sit nicely under the wide fenders, i believe they are 30mm.. what spacers would you recommend for flush fit. also what size tires would you recommend?
thanks for all the help i have trouble with all this stuff, figuring it out slowly
thanks for all the help i have trouble with all this stuff, figuring it out slowly
ThatRotaryGuy
Joined: Feb 2005
Posts: 169
Likes: 0
From: Ft. Eustis, VA
What do you want to do with this car?
Opelitis
Joined: Apr 2007
Posts: 48
Likes: 0
From: Norway
Can Post Only in New Member Section
Joined: Mar 2009
Posts: 1
Likes: 0
From: Guam
does anyone here know if an 18x9.5 +12 front and 18x11 -19 rear would clear on the fc without using a wide body? Planning on getting the ssr's ms1 and i want to make sure it can clear.
Should be flush with that spacer I mentioned at 0 camber (if you're using the 17x10 +20). You'll need a bigger spacer (not sure which) if you're going for that "hella flush" look with camber and stretched tires. If not, you can try 255/40/17 up front, if not 275/40/17 (if you don't mind the increased sidewall height)
What do you want to do with this car?
What do you want to do with this car?
btw thanks for all the help macz.
much appreciated!
I'm planning on running 16x9 +20 in the front and some 17x10 +15 in the rear does any one have a pic of how this would look or know how it would look will the wheels poke, sit flush or still be sunk in the fender?
thanks for the help, i ended up getting 17x10.5 +27 and have 15mm spacers. nothing is on yet. i was thinking about going 245/40/17 or is that too small? the car is my daily; in the future i plan to track it but i expect to have another set of wheels and tires for that.
btw thanks for all the help macz. much appreciated!
btw thanks for all the help macz.
much appreciated!
Good luck man.
