OOOOOOOOOOOOOOO!!!!!

SportMax!!!!

 

Right 962's, found quite a deal and was helpless. I'll post once their fitted on the car. Thanks again for all of the help.

 

I love those rims!!! They set the car off!!!

 

Will a 17x8.5 +35mm fit in the front on stock fenders and suspension? I know it will fit in the back.

 

9" front would need around a +15mm offset, if you got the fenders to cover them.

255 wide tires would not be a problem.

10.5" wide with +15mm offset in back with a 295 wide tire clears the inner suspension, but you'll need wide fenders back there.
-----------------------------------------

I got the info from RETed. So with 30mm front fenders and 30mm rear overfenders, will this setup sit flush with the fenders?

 

been thru the thread and my questions not answered.. 255 45 17 on a 17x8 approx 35-40mm off on the rear. mustang wheels. i dont think ill have a prob fitting the 255's on a 8' wheel, but will it fit space wise?. i have kyb shocks but ride height is pretty much stock. any objections.

 

I love this car. Followed some of the build and stuff on ZT. Its raw but still functional and badass.
Good Inspiration for real.

 

I want to buy 18x8.5 front and 18x9.5 rear. But I want the perfect offset for have flux fender look...

I think is 25mm for front and 25mm for back. What do you think about that ? and if possible what size tire a need to have the perfect fitment and look :P

Thanks guys and sorry for my english.

 

Flux fender look???

 

i picked these up from the junkyard, wish they fit-they rubbed when i turned hella fast...i wish i knew the offset at least

american racing 16x7

ttp://i159.photobucket.com/albums/t131/shift2gearx/mesh1.jpg

 

Sorry for my english :S !!! Flush fender look.

Like fc3spro say

"Minimum offset" = for those going for the flush look; pushes wheel toward the outside flush with the fender

http://fc3spro.com/TECH/MODS/RT/rims.htm

 

how low is your car from the ground, you have any more picture for your ride height? =)

 

18X9J +31
18X10J+36

Will these clear the brakes on an FC?

 

clear brakes yes..

clear coilovers, etc... no

 

spacer time!

 

Front: 18x8.5 +25
Rear: 18x9.5 +25

This offset is it perfect to have the wheel flush with the fender ?

What is the perfect tire size to put on this wheel with stock suspension.

Thanks all !

 

I would run 245 F / 265 R but you might have some problems fitting the tire in the front.

Btw, Where's the best place to get poutine?

 

ok guys i need a quick answer... i'm about to order my wheels and i have just one question...

for the fronts with a STOCK fender (able to roll if needed) will a 17x8.5 +37 wheel with a 225/45R17 tire fit

or would i be better off to get a 17X8 +31 wheel with the same size tire?

what would fit better and look good (flush with fenders and what not)

on the rear i have 17X9.5 +35 wheel with 265/40R17 tire

wheels are SSR professor SP1's in case you wanted to know and car is a 89 turbo II

thx,
-Jeff

 

17x8 +31 is good

 

thank you!!!

 

hmmm... Belle province or Lafleur :P

 

mmm.... La Belle Province.....

 

Guys, I need to know if the following wheels/tryes will fit under standard gaurds?

Front: 18 x 8.5 + 28 235/40/R18
Back: 18 x 9.5 + 30 245/40/R18

Your help would be appreciated.

 

guys i need these checked asap

18x9.5 rear
25mm offset


stock rear body coilovers/stock springs- i sold my old set i am buying coilovers again

18x8 front
35 offset

stock fenders coilovers/springs

 

I found some cheap 15" mustang wheels to mount my r-comps on right now.

They're 15x7 with a +24 offset
My tires are 225/5/15
According to FC3Spro I should have a +25 offset.

I'm on stock T-II/GTUs Suspension.

I'm just wondering will they rub or be Okay?

Will I need to roll the inner lip on the fender?