RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Suspension/Wheels/Tires/Brakes (https://www.rx7club.com/suspension-wheels-tires-brakes-20/)
-   -   H&R's and Koni's Feel Great (https://www.rx7club.com/suspension-wheels-tires-brakes-20/h-rs-konis-feel-great-311473/)

pianoprodigy 05-29-04 10:17 AM

H&R's and Koni's Feel Great
 
I had some Koni yellows installed in my car this week. I had been running H&R spring with the factory shocks (130k miles) and the difference is amazing. My brakes feel so much better because the car doesn't dive forward at all on hard braking. They are set about 3/4 hard in the front and 1/2 in the back. I went through some twisty roads about 40 mph last night and it felt great.

I had posted a thread a while back about this, so I figured I would update everyone...

H&R Springs
Koni Yellow Shocks
New Spring Seats

SleepR1 05-29-04 09:50 PM

Another happy H&R springs owner :)

rajeevx7 06-01-04 07:58 PM

Damn Alan,
It's about time! You have been talking about an upgrade for months. Wait till you get to the end of your tire tread life....you know, when you set them to full stiff and just start taking every turn @80 mph!

Raj

ProjectRxSeven 06-02-04 08:16 PM

Re: H&R's and Koni's Feel Great
 

Originally posted by pianoprodigy
I had some Koni yellows installed in my car this week. I had been running H&R spring with the factory shocks (130k miles) and the difference is amazing. My brakes feel so much better because the car doesn't dive forward at all on hard braking. They are set about 3/4 hard in the front and 1/2 in the back. I went through some twisty roads about 40 mph last night and it felt great.

I had posted a thread a while back about this, so I figured I would update everyone...

H&R Springs
Koni Yellow Shocks
New Spring Seats


Hey, could you let me know where you got your parts, how much they cost and how much your install cost if you didn't do it yourself. I'm trying to figure out how much I need for a similar set up. Plus im thinking of getting a bushing set too.

poolman1126 06-10-04 01:28 PM

Mine were $1200. That's parts, labor, shipping, tax, alignment, everything. Getting both koni's and h&r's installed tomorrow. Woo hoo!

ek9220ps 06-11-04 06:16 PM

do you know what's the spring rate? How much was the spring and damper?

is it stiff enought for the track?
-andrew


All times are GMT -5. The time now is 02:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands