FD3S 5zigen 17" recomended wheels
4 Attachment(s)
I was looking for a old vintage look for my FD3s for a long while (9 years) , I use the car for the street and race at the track (circuit , no drag) , knowing that the 18" wheels don't work well at the track , the only option was 17".
I'm so happy with my choose that I want to share with you my how it goes. Theses are the 17" 5zingen option that the brand recommend for the car |
looks good, what are the offsets?
|
!7" x 8" +35 front
17" x9" +42 rear Never like the way that the original rear wheels looks very inside the fender , this ones where a perfect fit. Tires 235/45 R17 and 255/40 R17 |
I'm also thinkin of the same wheels, different sizes/offsets.
Thanks for sharing yours. |
What suspensions are u on? (how much lowered?)
Would you say that 17x9 35 offset would stick out past the front fender? Nice look by the way. I'm after the same but i'm on s-tech springs which lower A LOT... |
I got the eibach springs with koni shocks, suck set up , work good for the street , better than original but the springs and it dosent drop too much the car in the rear , so the nose of the car get very low.
But I will go with the Tein springs the next time , they look lots better, and they work better also. |
the wheels works perfect , better than original.
|
I ran the 17x10 +25 at all four corners. just rolled the front fenders and light roll on the rear. tucked in the fenders very neatly w/o sticking out and also had the concave face if you like that look of course
|
Never been my favorite 5zigen wheel, but I'm glad you found something that would work for your needs.
|
1 Attachment(s)
Another reason to choose these
I just add a 3mm spacer ..... Now i got the Tein Flex suspension I just want to change the center cup for a black one , quite hate the chrome in my car |
All times are GMT -5. The time now is 07:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands