Do 18"x10" +38 not fit in the front of a FD?
https://www.rx7club.com/suspension-w...1/#post9872092
According to the guide above, 18"x10" +38 would not fit in the front of the FD. Has anyone been able to back this up? My fenders are already rolled and I'm running coilovers.:icon_tup: (I'm considering the more budget friendly Enkei RPF's, btw) |
3 Attachment(s)
with a little camber and rolled fenders they do fit. camber is -1.8 degrees or so, 265/35/18 tires.
|
1 Attachment(s)
Taken from the XD fit thread 2 below yours:
Attachment 605640 My street wheels shown are 18x10+38 front and rear. 255/35-18 front and 275/35-18 rear. Both front and rear fenders are rolled but not pulled. You should be fine and can adjust camber and ride heights to suit your setup. I was running about -2 degrees camber up front. |
Yeah, I ran 18x10.5 +38 just fine up front with rolled fender lips and max camber-
but +38 offset only supports max 265/35-18 tire width. https://www.rx7club.com/attachments/...les-fd-sj2-jpg |
All times are GMT -5. The time now is 10:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands