Corvette rims
Are there rims like this, http://i51.photobucket.com/albums/f3...ckonblack2.jpg
For an FC? Those are fucking sexy |
Corvettes are GM's and GM uses a 5x4.75" bolt pattern, we use a 5x4.5" bolt pattern, they won't fit. Besides, they're probably far too wide with too high an offset to fit anyway.
|
I think this look similar, http://www.rallysportdirect.com/shop...el-p-2241.html is call Advan Model 5
|
oh hells yeah Advan Model 5 in 18x9/18x10 do it uP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
Not sure if im ready to throw down 2 grand on some rims, even though they are sexy :P
|
I thought about doing it(fc), you would need a pretty tricky wheel adapter/spacer setup, probably custom built.
http://tomzwheels.com/catalog/produc...roducts_id/101 I was going to use these, the front spacer would have to go from 5x4.5 to 5x4.75 and be 40+mm thick(effectively making a 17x9.5 wheel with a 10-15mm offset), with some wide fenders. Rears would have to have the same adapter, but only about 30-35mm thick. I decided to scrap that idea because getting the spacer made would have been almost as expensive as the wheels themselves, and using spacers/adapters that thick made me kinda uncomfortable. It would probably work better with an FD seeing as the spacers wouldn't have to be as thick and you could get away with stock fenders. PS...I like how a whole set of z06 motorsport wheels are cheaper than one single Advan Model 5, lol |
offset 54 is hard to fit
|
replica wheels have an offset that will work, but the bolt pattern is still different.
|
All times are GMT -5. The time now is 10:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands