|
Can anybody identify these Ohlins?
These came on my FD from Japan. Look to be in good shape but don't look like the Ohlin's I have seen in the past. I'm guessing these are an old setup. Not sure how to adjust height, Looks like the lower perch may rotate around the body?
https://cimg5.ibsrv.net/gimg/www.rx7...addc5f1405.jpg https://cimg4.ibsrv.net/gimg/www.rx7...497843074f.jpg https://cimg2.ibsrv.net/gimg/www.rx7...e7c71d05e5.jpg https://cimg3.ibsrv.net/gimg/www.rx7...e46eb33398.jpg |
Yeah, that is an old offering that Ohlins had once upon a time. It's basically a shock replacement. The ride height adjustment is similar to what Koni uses with a snap ring style adjustment under the lower spring pad. You can see the grooves in your pics.
You cannot adjust it while on the car. You have to remove from the car, remove the upper shock mount so the spring is loose and then the lower spring perch slides off to reveal the snap ring that you can remove and move to the next groove. hope that helps |
Originally Posted by gracer7-rx7
(Post 12545067)
Yeah, that is an old offering that Ohlins had once upon a time. It's basically a shock replacement. The ride height adjustment is similar to what Koni uses with a snap ring style adjustment under the lower spring pad. You can see the grooves in your pics.
You cannot adjust it while on the car. You have to remove from the car, remove the upper shock mount so the spring is loose and then the lower spring perch slides off to reveal the snap ring that you can remove and move to the next groove. hope that helps |
| All times are GMT -5. The time now is 11:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands