camber problems
 

Hello there guys and gals

I have a 88 10th AE fc3s and I just put stance coilovers on. Love the ride height I have it set at but it has a natural negative camber that's causing unwanted tire wear. Is there any way to combat this issue thanks for any help you can give

not a problem. buy a couple of adj camber plates. suggest you post on the FC section for more informed guidance.

say hello to Ft Stewart for me... i spent 10 months there.

good luck,

Howard

The tire wear is probably caused by the toe change when you installed them, camber doesn't have very much effect on tire wear. Especially at the semi mild camber that you're probably running.

Also, you can most likely dial all the camber out with the adjustable top mounts I assume they come with

If it's the rear camber you're worried about, obtain either:

-A center camber adjuster link (Ground control, Mazdatrix, and other companies)

and/or

-Individual camber adjusters from AWR