9.5 or 10 inch rims with plus 43 offet or more
 

why are rims that are 9.5 or 10 inch basically non existant in a high offet like 43mm or more?

i hate the look when rims stick out in back. rolling the fender to force the fit in my opinion juts doesnt look right.

Could anyone recommend a nice looking rim that comes in 9.5 or 10 inche with an offset of 43mm or more?

my car is FF...lol... but if you look at the rims they are 18 9.5 +45 all around, they dont stick out as I dont like that look.

Enkei RPF1's very light weight...

Volk Racing CE28N, 17x10 +45:

http://www.autornd.com/catalog/produ...b2237cbbcd8d5f

SSR Comp RS, 17x10 +45

I picked up 18x9.5 +50mm SSR comp's from tirerack for $199 per wheel

I have work meister 18 x 9 + 48 and 18 x 10 + 43

pics?

My BBS RG-R's are 18x10", +42. No rolling necessary.

i think the wheel and tire should be taken into consideration together to see what fits and what doesn't.
why get a 10 inch wheel if you will only run, for example, a 265 width tire?

i agree. thats why i asked for 9.5 or 10 cause i want to run 275s on back.

9.5 should be fine for 275s, the best way is to see what the tire manufacturer suggests for that particular size tire.

There a lot of multi-piece wheels that you can order with custom offsets to accommodate your setup. PM me if you need a list.

at italia rivas 17x8 17x9.5 +43 offset (no rolling)..

tks g i will check em out.

I think the issue is weight or budget. If multipiece wheels were an option i'm sure you'd find some.

matty,

Keep in mind in terms of

FRONT SPACING

9.5" +38 = 10.0" +44

Therefore you must accomodate for this variation.

If you want a 9.5" +43 then look for a 10" +50.

Rishie

all the "cheap" ebay rims are less than +43....anything good will be offered higher.

I am selling a set of wheels right now with that exact offset
rears are 17x10 et 43.

Fikses...yum

hey rishie do u sell work Emotion CR-Kai? i dont seem them listed on ur website

I do not. Heavy heavy ass wheel. Cast, just doesn't fit our criteria. i.e. Enkei Racing Series wheels of Japan.

Rishie

got it.....dont want heavy pigs...thats for sure. of well

they looks very similar to the enkeis....just better offsets for the fd

5zigen Pro Racer GN+

17x9.5 +43
275/40 tires

https://www.rx7club.com/attachment.p...1&d=1163566857

I have a set of Buddy Club wheels 19x9.5 +45 at the back and they are fine

Neoturi, you're running that both front and rear? I'm assuming just in the rear.

I'm running 17x9.5 +42 with 275/40 all around. Had to roll the front fenders, but the rears fit without any modification. I'm running a TP bar up front, and at full lock the inner sidewall touches the front edge of the swaybar arm. Any more offset would reduce max steering angle, and any less would contact the fender. Close fit but it works - helps to run at least -1 deg camber.