28" Tall ET Streets, Will they fit
I plan on using some 28" tall ET Streets on a 16" rim.
Will the fit? Will a stock rim work or should I try one that tucks in a bit more? Thanks |
Why don't you just run the 26" ET Streets on the stock wheels?
|
Brian Hinson with an LS1 powered FD runs 15x8 drag wheels with 4.5" or 5" of backspacing (not positive on offset) and has a 28" slick. Obviously you can't run lowering springs or '99 RZ rear brakes.
hinsonsupercars.com Good luck, -GNX7 |
I can't run the 26", it ends up being too much gear. I have an LS1 conversion and 4th ends at 114 with a 26" tire, 28"'s get me 122.
Mine is an R1, thats lower than stock...Hoosier makes a QTP 27" tire. How much lower is an R1 than a Touring? |
An R1 is the same height as a touring. The T56 6-speed has 4th topping out at 114? That seems strange. Perhaps you need a higher rear-end ratio. Are you still running the stock FD rear end (4.1:1)?
|
Yep, running the 4.11.
I'm going to switch over to Jimlab's Cobra diff setup and go down to a 3.27 or 3.55. I just raised the rev limited 400rpm, so that'll give a few more. I figuire the car will run 116-118, as long as I can just squeeze it in that would be cool. |
All times are GMT -5. The time now is 10:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands