16x8 +35mm and 16x9 +38mm
Anyone put something like that on their FC? and will that rub or not for the rear or front base on tires that being put. Will the wheel+tires works in different type of springs or any clearance with this.
thanks just your opinion. |
Really depends on tire size, both will be close to the suspension on the inside. Should be ok with a 225/50/16 front and 245/45/16 rear.
http://www.fc3spro.com/TECH/MODS/RT/rims.htm |
^^ thanks for the link, i forgot to look at that. thanks tho.
|
currently i'm on Tein spring but any issue on that?
|
Yes, in the front they give LESS clearance than stock. You'll need spacers and maybe will need to roll the fenders a bit as a concequence if you want to use 225's.
|
how do I roll my fenders? any tips.
|
http://forums.vwvortex.com/zerothread?id=2435165
Or there's a $250 Eastwood tool that's essentially the same thing, or you can take your trusty old wood baseball bat and use that to roll the fenders. A tip though, warm the paint with a heat gun or hair dryer first, it'll help prevent it from cracking. |
oh man nice wheel size choice!
you will probably make out a-ok but there is a chance you might need a spacer up front, a small thin one but probably not. |
All times are GMT -5. The time now is 10:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands