Need help with S-AFC install
 

I need help installing my S-AFC, I already connected and sautered the green, brown,black and red wires.the wiring diagram shows that 6 wires should only be connected. Now I only have to connect a yellow which is the air flow signal output and the white wire which is the air flow signal input, now here's my question, where does these wires connect to? Any help us much appriciated, thank you

On the wiring diagram, its shows the two I haven't connected as throttle signal and the other as airflow signal, so which wire goes to which entry? Thanks

Where did this thread get moved to? I can't find it!

The yellow and white are input and output wires. They connect to your airflow signal. You have to cut that wire and solder the white and yellow. I don't remember off the top of my head which is which though.

i finished the install,but when i went to turn on the car,it cranked but didnt start, i doouble checked everything and it looks fine,so why doesnt it turn on? someone please help me out here, i appreciate it very much

go to 1300cc.com and make sure its installed correctly. You probably have the airflow wires backwards.