blue wire mod on safc
i connected the blue wire on my safc to the o2 sensor by the ecu....but i dont know what setting to use to monitor it....right now im monitoring rpm and throttle (via pressure sensor)...what do i need to select to monitor the o2 sensor
|
go back to the original main menu, go to etc., then go to sensor check. I believe it will be the second voltage.
|
What you can read O2 voltage with the SAFC?
|
Just reading the voltage from the stock narrowband o2 sensor. I wouldn't reccomend tuning by it, get a wideband. They're cheap enough these days.
|
true
|
Blue wire mod
Hello,
Do you just tap the blue wirie from the SAFC to the black O2 wire from the harness? Thanks. |
correct, just tap into the o2 wire that's coming into the ecu. I don't recall which pin it is offhand.
www.iluvmyrx7.com has the FSM, look in there. |
What is the purpose of this mod? I didn't know that the SAFC can monitor O2 readings. Please enlighten me on this mod.
|
All times are GMT -5. The time now is 09:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands