705 RWHP on Mustang Dyno E85
Just wanted to share some great news. Took my FD over to PRT Performance at 1421 N. Cowan Ave in Lewisville, TX (Steve Kans shop) to use his Mustang Dyno.
For those wondering who built my FD and who is tuning the car, George Marinov has done all the work, built my Engine/Set up (2 rotor) and has been doing all the tuning. We wanted to see what it would do on a real dyno so I had George take the FD to Steves shop. We ran the FD up to 26psi and it put down 705RWHP running E85 on Steves Mustang Dyno. Made 19 runs, all to 10,500 RPM's and the car ran really smooth. Trying to go back next week depending on my schedule so we can keep moving the boost up until we run out of fuel/injector while still being safe. Thanks to George for all his hard work especially on the tuning, and to Steve for staying late and letting us use his mustang dyno. A little plug for Steve, if you are in the DFW area or even close to the area and need work done on your rotary go see him. |
VERY nice!
You have yerself a 9 second car! |
Thanks, can't wait to take it to the track and see what it does.
|
Dam son
|
Very nice numbers, congrats.
|
Who is George Marinov, does he have a shop? Any link to more specifics on the car? Great numbers, congrats :icon_tup:
Originally Posted by afawaterpolo
(Post 11106338)
Just wanted to share some great news. Took my FD over to PRT Performance at 1421 N. Cowan Ave in Lewisville, TX (Steve Kans shop) to use his Mustang Dyno.
For those wondering who built my FD and who is tuning the car, George Marinov has done all the work, built my Engine/Set up (2 rotor) and has been doing all the tuning. We wanted to see what it would do on a real dyno so I had George take the FD to Steves shop. We ran the FD up to 26psi and it put down 705RWHP running E85 on Steves Mustang Dyno. Made 19 runs, all to 10,500 RPM's and the car ran really smooth. Trying to go back next week depending on my schedule so we can keep moving the boost up until we run out of fuel/injector while still being safe. Thanks to George for all his hard work especially on the tuning, and to Steve for staying late and letting us use his mustang dyno. A little plug for Steve, if you are in the DFW area or even close to the area and need work done on your rotary go see him. |
Originally Posted by chiefboon
(Post 11107816)
Who is George Marinov, does he have a shop? Any link to more specifics on the car? Great numbers, congrats :icon_tup:
|
Originally Posted by chiefboon
(Post 11107816)
Who is George Marinov, does he have a shop? Any link to more specifics on the car? Great numbers, congrats :icon_tup:
He also does other rides, has 2 R33's he's building that will be 1000-1500 AWD RWHP cars, done NSX's, Masseraties, etc. you get the picture. He has customers that have vehicles worth over 100,000 coming to him. He can tune any ECU, and is amazing with rotaries. If you're in the DFW area and/or surrounding area you should check him out. |
I can say he is a great guy, i meet him with a friend of mine, and i saw his personal 3 rotor but i don't know if he finish it
|
Originally Posted by RiceFx306
(Post 11135650)
A badass. No shop. http://www.facebook.com/media/set/?s...2280356&type=1
|
Originally Posted by chiefboon
(Post 11136267)
Who's car is that? Looks insane.
|
Where did those fender flares come from? Nice car!
|
Originally Posted by afawaterpolo
(Post 11135817)
George used to work at Gotham Racing before they shut down. He has done all kinds of crazy setups. He works out of his home. He built my FD which is almost to its goal of 1000 RWHP on just E85. We are at 810 RWHP so far, it's running a Motec M84. All the work was done by George. He is currently working on 3 other crazy FD's, one is going o easily break 1000 RWHP and make mine look tame. All the FD's are 2 rotor setups. He has done many 3 rotors also.
He also does other rides, has 2 R33's he's building that will be 1000-1500 AWD RWHP cars, done NSX's, Masseraties, etc. you get the picture. He has customers that have vehicles worth over 100,000 coming to him. He can tune any ECU, and is amazing with rotaries. If you're in the DFW area and/or surrounding area you should check him out. |
Some nice numbers from Khan's "heart breaker" dyno.
|
This is the same person that is building and tuning my FD. :icon_tup:
|
video ??!!
and what trans are you running? i have a s366 and having trouble doing rolls because of wheels spin. also on e85 what can you suggest? i ahve stock trans KAAZ diff |
All times are GMT -5. The time now is 11:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands