|
Will it fit?
I am looking to replace my TO4R with a GT4094R (1.06) on my FC. My question is, will I have clearacnce issues with my FC HKS cast manifold?
Or should I ditch the HKS cast manifold altogether because the FC version(the one i I have) is undivided and the GT4094R is divided? I would prefer not to ditch it because of money issues, but if its not recommended then I guess I will have to. Any input will be appreciated. Thanks guys |
thats what he/she said
|
Only issue you'll run into is running massive A/R exhaust housings on that manifold. Due to the placement, the center of the exhaust housing is in line with the front secondary runner on the LIM, too big an A/R housing and it hits.
I've ran a 1.15 with enough clearance to slide a blanket between, but barely. I wouldn't recommend going any larger. As long you keep it as big or smaller then a 1.15 you should be fine. |
Originally Posted by classicauto
(Post 7617192)
Only issue you'll run into is running massive A/R exhaust housings on that manifold. Due to the placement, the center of the exhaust housing is in line with the front secondary runner on the LIM, too big an A/R housing and it hits.
I've ran a 1.15 with enough clearance to slide a blanket between, but barely. I wouldn't recommend going any larger. As long you keep it as big or smaller then a 1.15 you should be fine. |
| All times are GMT -5. The time now is 11:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands