Whose Looking to go Single Turbo?
 

Who on this forum is looking to go single over the winter, and what kit are you thinking of going with? Or what turbo, manifold, and wastegate configuration do you want to use?

I am going single in a week or so depending when kit arrives, it will be Rotary extreme's TO4R kit with a stainless steel manifold rather than the cast iron...Tial 46mm wastegate.

Fishin for a sale;)

No not at all Carl, why would you say that???? Please don't check this thread out?? https://www.rx7club.com/showthread.php?t=375596

Maybe in a year or so. Something big enough for a Kan half bridge port, so at least a 1.20 ar

Mod, there are a couple guys that claim to be looking for these, maybe search 40R, and see what you get.
PS, like your style:)

Thanks Carl... I'll try but everyone seems to only want to buy the turbo. And that doesn't help, with the new intake manifold the turbo needs to be mounted about even with the water pump.

I am waiting for my A-SPEC GT35R to arrive.

T04R or T04Z for me thanks. :)

Zach

Could you sell me the a set-up without the turbo?

None of the above.
Apex-i Isamu IHI RX-6 dual BB turbo. Just finished, need to crank the car and tune the AEM before Christmas.

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/pictures-new-turbo-install-374291/

I'm going with a half-bridge TO4R. Should be up and running by next weekend. Looking forward to the dyno results, and finally driving the damn car.

1revn3rdgen, I will sell the setup without the turbo. Let me know, it will come with the ceramic coated manifold and downpipe with wastegate plumbed back in and air/fuel bung welded into downpipe, and 50mm Turbonetics NewGen wastegate. I will even include all the lines and fittings and block off plates, and even the air filter. So all its missing is a turbo. It is basically a complete kit just missing a turbo.

Well let me know
Edan
my number 847 627 0789

how much without turbo???

mike

you got a pm

Hks T51r Kai
 

Just waiting for the car I bought to arrive, It looks god on the table but will look better on the car:)

Looks like seven people or so are going with the GT40R... and non of them want to save money, and buy a kit that has never been used, and still costs less than a new kit and has had the mani/ and dp ceramic coated.

when i do go single it will be the gt40r or t78...but that would be winter/springish. the motor goes in to rx7store in jan so i will have to save more money again for the turbo

Installing Phamspeed's custom PT-63 Kit in a few weeks!!

T-78, street port, methonal injection, and 19 psi daily driven pump gas.

td07-25G Largest possible street port... the rest is taken care of. :D

Got a turbo kit still for sale

you asking or telling?

that would be telling...

what kind of kit?