where does this go?
 

Where does this connector go? I just got my converted engine harness back in and can't remember where it plugs in. I don't see a connection for it, and I've searched for days. a photo would be helpful.Thanks in advance
[IMG]http://i1127.photobucket.com/albums/...h_IMG_0198.jpg[/IMG]

Also big thanks to grimple1 for the write up on the harness conversion.:icon_tup:

that looks like the coolant sensor gauge wire to me. why is it in the cabin? is it paired next to a wire with a ground? if it is that wire, it goes on a connection under the oil filter

If its near the ecu it looks like the original fan switch wire before the recall. If your car had the recall work done i think it is just there not plugged into anything.

Its in the intermediate harness near the ecu. the coolant temp sensor is plugged in and

working fine. my fans are not coming on now but they were before I cleaned up the harness.

thats why I was thinking that it may have something to do with the fans, but there is

nowhere to plug it in. it seems like I remember unplugging it when I took the harness out,

but thats been a month ago. They're having an imports vs muscle car race at carolina

motorsports park next week, so I need to get my fan issue fixed asap.

Ground it

10-4

I grounded it and now the fans come on as long as the ignition is on, and they stay on for quite some time after I've switched it off after driving. does this go to the fan switch? the fans were not operating like this before I re-did the harness.

might want to check over your harness