(turbo newb alert) oil smoke after t04b/ht18 hybrid FC
hi, i built and put a hybrid turbo on my s4 fc chassis rx7 a few weeks ago and now it smokes @ and idle. the only two things that i can think of that could cause this problem is: 1. i damaged the rear oil seal when i assembled it, or 2. my drain doesnt work.
i dont think it is the front oil seal because the intercooler pipes show little to no oil residew. i suspect the rear oil seal because its the first turbo i rebuilt and could have damaged it i suspect the drain line because i had to make an oil drain due to the fact that the stock s4 oil drain doesnt clear the t04b compressor housing, so i used a s5 turbo side drain line and the s4 front cover flange and used a secton and i'm sure this changed the angle of my drain pipe sence the drain flange at the trubo comes down farther (clearing the compressor housing), i also have smoke that comes out of the brether filter that i have in my catch-can system. i had a stock perfect condition jdm stock s5 turbo on it b4 i put the hybrid on and it didnt smoke whatsoever. i'll prolly be tearing back into it soon when i put it away for the winter. thanks! |
bump
|
Did you install the breather at the same time as the turbo? Is the oil diluted with fuel?
|
no the oil is not diluted and the breather/catchcan setup has been on for about a yr
|
pull the turbo back off and get some pics of the turbine housing inlet and outlets as well as your oil drain.
|
All times are GMT -5. The time now is 02:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands