RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   turbo help! (https://www.rx7club.com/single-turbo-rx-7s-23/turbo-help-650832/)

frisc 05-10-07 06:58 AM

turbo help!
 
i plan on going single turbo but i dont know whitch one to get. My goals are to have somewhere around 400hp and have full boost(156si) around 3500 rpm. It's bascially going to be a streetcar and probably see the dragstrip a couple times... i was looking at the GT3076R or GT3071R or something along those lines.. i know alot of people go with the gt35 but i think it might be a little overkill for my goals. what u guys think?

dregg100 05-10-07 09:17 AM

at 15 psi you will need the 35R. do you have a streetport? if it is stock port you will need a little more boost, AI, or a bigger turbo. the general rule is gt35r @15 psi makes right at 400 whp on a streetport engine.

Wargasm 05-11-07 12:11 AM

A GT30 ain't gonna cut it (this is off the top of my head after a few drinks!).

I would try one of: GT35R, GT3574 (this is a customized turbo from A-Spec), T04S (cheap and works!)

pwwatkins 05-11-07 02:11 AM

If you can make it over to banzai racing's cookout in indiana on the 19th, I'm sure someone would give you a ride in their singled fd. There should be quite a few there. Look in the midwest section of the forum.

frisc 05-11-07 06:57 AM

how about a t3/t60-1 or sc61 @ 16psi? that should get me close to 370-400 range right? my mods are:
greddy 3 row fmic
3"dp/mp/4" from mp to muffler
850cc all around
power fc
supra tt fuel pump
greddy compression elbow

dregg100 05-11-07 09:06 AM

you need a ported motor! and try to stay away form T3, they tend to raise your EGT's. and you will deffinately need bigger secondaries more like 1300s or 1600s.


All times are GMT -5. The time now is 11:09 AM.


© 2024 MH Sub I, LLC dba Internet Brands