To4e install 5psi?
I installed a to4e hybird yesterday I am getting about 5 psi I have a greddy P.E. exhaust, no cats, bonez downpipe, Walboro 255, 720 secondarys, Rteck 1.7 chip Safc, FMIC I was getting about 7 psi with stock turbo, I am using the stock TID is this the reason for low boost ? I pressure checked piping and intercooler checked OK, I tried to test pipe, turbo, and TID but it wouldnt build pressure is it suppose to be able to hold pressure?
Thanks Johny |
To4e
tell me you have some sort of boost controller . if not you should to get one .
i have a very similar setup and yes i did run without it for a while when it was fairly low like at 7lbs boost but i did have boost spike which is NOT GOOD. i think stock boost should be 7 so you should be seeing 7lbs . the club is having a group buy on widebands i suggest you get your hands on 1 so you can tune your 7 with it since you hace an AFC . regular a/f guages are not accurate especially if you plan on running higher boost . i will be running the wideband full time that way the correct A/F reading is always present . try to get a ebc or a mbc if you can . |
All times are GMT -5. The time now is 06:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands