For those with the HKS log mani and 40mm gates
I may be too late with this information, or maybe its new.. Who knows? But here we go:
For starters, the HKS 40MM external gate is a 40mm inlet, and a 31.75mm outlet. Why? Because HKS measures the inlet diameter, and thats it.. So in essence you are getting a 31.75 mil wastegate.. I know this because I spent ALL day on the phone with HKS USA... Ever wonder why the damn thing starts creeping? Now you know.. Second, HKS has DISCONTINUED the production of the rectangle flange 50MM wastegate and there is NO ADAPTER unless you make it yourself. So unless you can find a used 50mm that is NOT an SS Racegate, you are doing custom work.. Have fun. BTW, the outlet size on the 50mm is 51.3 or something to that effect. Much more flow.. (BTW thier website STILL says that the manifold will accept a 40 or a 50mm gate.. Jackasses..) Lastly, if you want to purchase on of thier crappy 40mm flanges to adapt say, a TIAL or TurboSmart or whatever, be prepared to shell out $60 for a mild steel flange... Again, I dont know if this information is new, or if the word is already out, but I am personally DONE with HKS.. I am getting a fucking TIAL.. Jerks.. |
TiAL has never done me wrong. I'm going to use them for both the wastegate and BOV on my next project.
Made in America too. :D |
Originally Posted by ducktape
TiAL has never done me wrong. I'm going to use them for both the wastegate and BOV on my next project.
Made in America too. :D |
Here, For only $29.00 HKs to Tial WG adapter. I will be buying one of these for my WG upgrade project. HAVE FUN!
http://www.himni-racing.com/images/HKS%20to%20tial.jpg http://www.himni-racing.com/index.ph...00d187e89c4781 |
I just sourced a Hks 50 mm racing with the rectangle flange so I'm gonna switch it out. I originally recirculated the wastegate but with the 50mm I'm gonna vent it and try it out to see if I can take the noise. I'm running 3" downpipe, 3" midpipe, and Apexi GT catback right now so the additional noise shouldnt bother me.
|
ere, For only $29.00 HKs to Tial WG adapter. I will be buying one of these for my WG upgrade project. HAVE FUN! http://www.himni-racing.com/index.p...800d187e89c4781 you just became my new hero... Is that for the Rectangular flanges? |
Originally Posted by 93FD3S
I just sourced a Hks 50 mm racing with the rectangle flange so I'm gonna switch it out. I originally recirculated the wastegate but with the 50mm I'm gonna vent it and try it out to see if I can take the noise. I'm running 3" downpipe, 3" midpipe, and Apexi GT catback right now so the additional noise should hurt.
|
Im having ATP turbo build me a flang HKS to Tial Vband
im going to be using a tail 44mm vband flang wastegate on my hks manifold here is my manifold http://infini-fc3s.cyberosity.com/ga...and+down+pipe/ here is a tial to hks also for $28 http://www.atpturbo.com/Merchant2/me...egory_Code=FLS |
Jesus christ this forum rocks! You guys are really bailing me out of a jamb. Thanks!!
Now I can get a tial and tell HKS to pack sand.. |
Uhh..
Doesnt look like this fits an HKS log... Adapter Flange, Allows 46mm wastegate to be used with HKS Flanged Manifolds, Adapter bolts onto the 46mm wastegate using 4 countersunk allen bolts (8mm x 1.25 pitch) and has 4 tapped holes on adapter to bolt to HKS flanged manifold using studs and nuts (8mm x 1.25 thread). HKS manifold must have bolt pattern of 2-3/16" bolt-center to bolt-center spacing for side to side adjacent hole measurement and 3" bolt-center to bolt-center spacing for diagonal holes. ^^ is a square as far as I know... Maybe I am measuring this like a moron.. Looks like it might work on a different pattern then the actual rectangular flange... |
HKS T04R manifold. ;)
|
Originally Posted by 87GTR
HKS T04R manifold. ;)
|
I Just Responded To Te Othrer Post...im Unaware Of A New Style 50mm Gate....can U Provide Pics?
Becuase The 50mm On Thier Site Is 4 Bolt |
Yeah, its 4 bolt, but the flange is square, and no longer rectangle. You can call them and they will even tell you that it wont fit.
|
My 40mm Is Indeed Rectangular....alsoi My 50mm Is....i Never Had A Square Flange Only For My Dump Pipe That Was Square Not My Wastegate Inlet
|
Originally Posted by njstreetrx7
My 40mm Is Indeed Rectangular....alsoi My 50mm Is....i Never Had A Square Flange Only For My Dump Pipe That Was Square Not My Wastegate Inlet
Yep, because HKS discontinued that model of 50mm about 8 months ago and they are no longer available. Only the square ones.. Dont believe me if you like, dont matter to me. |
I found the old style 50mm locally. But it was replaced with this one... http://www.hksusa.com/products/?id=764
|
oooo i c the difference.....why would they change the flange
|
Cause they are assclowns..
|
I'm having a hard time grasping the consept of saying something is 40mm when in fact it is not. I kind of understand about the hks, at least the inlet is 40mm. I have the TiAl and started thinking after I saw this thread about the actual size of it being that i have one. Well the inlet size to the 40mm tial wastegate is 36.15mm and the oulet is 34.25mm. What a bunch of shistey business tactics.
edit: I hate to see the size of a 38mm wg. |
Originally Posted by hondahater
I'm having a hard time grasping the consept of saying something is 40mm when in fact it is not. I kind of understand about the hks, at least the inlet is 40mm. I have the TiAl and started thinking after I saw this thread about the actual size of it being that i have one. Well the inlet size to the 40mm tial wastegate is 36.15mm and the oulet is 34.25mm. What a bunch of shistey business tactics.
edit: I hate to see the size of a 38mm wg. TiAl makes a good product, though. I have the 40mm and it's holding up great. :) |
So far so good with the wastegate, but i'm not making serious power.....yet. The manifold was a piece of shit. Didn't align itself with the ports. They were for a 12a. They just swapped out a flange. fucking lazy bastards.
|
Originally Posted by hondahater
I'm having a hard time grasping the consept of saying something is 40mm when in fact it is not. I kind of understand about the hks, at least the inlet is 40mm. I have the TiAl and started thinking after I saw this thread about the actual size of it being that i have one. Well the inlet size to the 40mm tial wastegate is 36.15mm and the oulet is 34.25mm. What a bunch of shistey business tactics.
edit: I hate to see the size of a 38mm wg. Its better then a 40mm inlet and a 31 outlet!! What a rip... |
yeah I guess but something tells me all this work I did to this manifold to get the 40mm tial to work was done in vane and I'm going to get boost creep with it, damnit!
|
I think you might be alot better off with that Tial 40 then the HKS 40. Just my .02
|
All times are GMT -5. The time now is 08:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands