Sweden FD singel Turbo HKS T04R
5 Attachment(s)
Finally I got started! First a short presentation of my car.
Mazda Rx7 FD3S 13B TwinTurbo 1992 Milage: 10500miles (driven 50miles since renovation) Made by Fredrik Geite Rotary Racing 3mm RA Racing Apex, dowellpinned, vitonrings, bored cooling and oil channels. Streetport RR Stag 2 (20-25% more flow) 1 new rotorhousing Matchport intake too motor Stuff I ported myself. Matchport intake/throttlehouse/elbow plus fine adjustments removing flaws. Current setup New ACT Prolite flywheel 11lbs (23lbs orginal) New clutch 6 pucks Carbon metallic 3.5" catback Megan Racing Strut brace RimsACE Zeus SL 18" Tires Toyo Proxes HKS turbotimer Greddy turbo pressure gauge MomoCorse steering wheel MazdaSpeed Carbonlook panels Parts I´ve bought for the project Fuelsystem: 2x Bosch 044 pump Extreme Fuel System (Rx7store) catchtank RP Fuel pump relay Ignititon and engine control: Apexi PowerFC FC-Datalogit Bosch LSU4.2 5-wire, O2sensor Jacobs FC1000 Magnecore 10mm spark plugs GM 3 Bar Map Sensor MSD Blaster ignition coils leading Cooling: Greddy 3 row FMIC Aluminum Radiator 3 Row JVT Greddy 1.3 Bar Radiator caps AST tank Exhaust: 3" Downpipe stainless 3" High Flow Cat (only for the yearly inspection) Brakes & Chassi: Brembo rotors slotted/drilled Hawk HPS pads Stainless brakelines Super Pro 24piece Othere: FilterMAG Evo-R kit HID 4300K GReddy pulley kit RX-7.COM Rotary Oil Cap Optima Red Top Batteri Rx8 knob Cooltech exhaust wrap and tubo insulation bag. Turbo: HKS T04R HKS SS manifold HKS SS racegate 50mm /Matt ______________________ Rew Seven Racing Sweden |
5 Attachment(s)
Some pics
|
5 Attachment(s)
more pics almost all parts are bought from the states :)
|
5 Attachment(s)
last shipping with parts should be here on thuesday they are going by sea from USA.
|
5 Attachment(s)
More pics :) can´t get them to show in full size :(
|
5 Attachment(s)
lots of pics
|
5 Attachment(s)
Hitting the dyno 2weeks from today
Porsche fuelfilter biggest one they have $60 each :icon_tup: |
5 Attachment(s)
lots of them
|
3 Attachment(s)
................
|
1 Attachment(s)
Test mounted my new headlights today (Evo-R ) :icon_tup:
|
Vey Nice setup ! I want to run dual fuel pumps, what is required to do it, besides the pumps. How did you do the hard pipes? then having them going thru the plate? Did you use your existing setup then take a spare setup and transfer it over to the one? I need to figure it out soon, i'm just about to put my motor in then i'm going to do the fuel pumps next, so i can get it rolling soon.
|
4 Attachment(s)
Actually I have had to put down a whole lot of thinking when making the fuel system... didn´t know before that it would be the hardest part to fit together.
I´ve used a 12mm/9mm soft copper pipe as a main fuel line thought about using the original as an extra return but I don´t think it´s necessary. Looked into my Aeromotive FPR and the return hole was really small. I´m going to mount the pump set-up were the extra wheel usually is in the trunk and use a catch tank there to. Close to the batteri :) putting a lid onto that to. The pumps are running in parallell. Wait and see have not thought everthing thrue yet but the car is supposed to be finished in 10days. Going to buy some more couplers for the fuelsystem today but they are so damn expensive especially here in sweden :( |
5 Attachment(s)
Some pics with the fuel install more coming up!
|
5 Attachment(s)
more pics
|
2 Attachment(s)
Rx7store Greddy 3Row FMIC has arrived :)
|
I bought one of those kitts with block of plates on rx7store how many should I use? I have removed the airpump but I´m going to use a electric one later.
Where do I install the vaccum to the topp of the wastegate? And where to install the vaccum to the fpr? :scratch: |
I have one, airpump (electric). ;)
|
Looking good. Keep it up.
|
5 Attachment(s)
Start up tomorrow and dyno on saturday :)
|
Keep up the good work!! :)
|
6 Attachment(s)
Big jump here but I thought it would be fun to update even if there is not much feedback here.
The car is tuned and ready and there will probably not be any more work until autumn. Then I will replace all the bushings with the super pro kitt I bought. Also going to save money for a Kaaz diff before I crack my OEM :) Oh I also bought a HKS Hiper Damper II kit not new but as good as new for $990 what a difference it made. 466hp 515Nm__380lbs/ft |
Tuned by ABIEX ...G-R.se
|
Shes Gorgeous!!!
|
What boost was that power made on?
|
Originally Posted by djseven
(Post 8428138)
What boost was that power made on?
After that the exhaust port couldn´t flow more. |
Originally Posted by illtakeyochik
(Post 8427972)
Shes Gorgeous!!!
|
|
:twitch: i want....
but great build thread very organized and easy to follow, and obviously some good results!:) |
new posts coming up soon I hope. Bought a super pro bushing kitt last spring so I have to get started with that.
Going to repaint the rims to but I have not decided which color yet maybe black with a polished edge. Going to remove the AC compressor too doesn´t work an I won´t repair it. |
Ser riktigt bra ut! har aldrig sett denna konstigt nog :s.
får jag fråga om HKS coiloversena funkar bra? har varit sugen på att köpa sånna men hur tycker du dom beter sig något att ha för att drifta med på bana och köra gata? är dessa likadana som du har? http://img206.imageshack.us/img206/2594/hkscw6.jpg |
Japp det är likadana har inte mycket att jämföra med men jag är nöjd med mina. Går ju att justera som man vill och komfort finns så dom är inte allt för stötiga iaf.
Hör dig för lite mer jag kom över mina i mkt fint skick billigt så dom va värda pengarna alla gånger tror jag pröjsade 6000kr om jag inte minns fel. Såg knappt använda ut, kostar väl uppåt 12-13tusen nya i USA tror jag kanske dyrare nu när dollarn gått upp. |
Sick car i like it !
|
Originally Posted by 93singlesnailRX7
(Post 8941883)
Sick car i like it !
|
All times are GMT -5. The time now is 08:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands