Stock oil cooler with 60-1?
 

Can the stock oil cooler on my '87 TII handle the requirements of my 60-1?

I have two stock oil coolers, If I weld those togeather would that be enough?

Chris

I would say that the stock setup is going to be more than enough to cool the oil for your engine/turbo. If anything your probably putting less heat into the oil by running a single. If you want you can always put a oil temp gauge in the oil line and see what it reads. I'd do that before tring to make two oil coolers into one.

Re: Stock oil cooler with 60-1?
 

You'll be fine with just one.

sweet :)

but check the oil line. they are prone to leak.

which oil line? the two from the cooler or the turbo?

The oil line to turbo is metal pipe and I think it will survive no problem.
But the one from oil cooler to engine is not.
I am not 100% sure as mine is replaced with earl's before i own it