RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   Single turbo upgrades (https://www.rx7club.com/single-turbo-rx-7s-23/single-turbo-upgrades-753348/)

mazdabill 05-03-08 02:20 PM

Single turbo upgrades
 
Going single. I've made a list with prices. Hoping to get some advise on list. Do the prices look acurate? Recomondations for brands and were is the best place to get them? Should I have anything else? And what is fpr?

Upgrades for single turbo:

-Upgraded injectors$68 each 4 @$272
-upgraded pump$100
-ECU$150-1500, PFC$200, Microtech, Haltech, all work
-new fuel SYSTEM$90.1600 secondary 850 primary, fuel rails$50, fpr, line,
-boost controller$150
-upgraded clutch.$500-600
-Radiator, Koyo $360
-Exhaust upgrade$450-500
-Dual oil coolers $175-300
-Flywheel $260
-wideband o2 sensor/controller $290
-Ignition Kit $390
-Ignition Harness $40
-Wire plugs $70
-Spark Plugs $50
-Differential Bushings $200

Total: $3,797-$5,422

mazdabill 05-03-08 02:21 PM

Also, any one know much about the AEM Methanol injection kit? Should I get it?

RotarySB 05-03-08 10:18 PM

fpr = fuel pressure regulator

and I don't know how you came up with a PFC costing only $200. You can probably get one used for about $5-700 and a new one for around $1000

2Fierce 05-03-08 10:46 PM

Don't bother, this guy made another thread about the same thing, and than copied and pasted EXACTLY what other ppl posted with no thought process inbetween.

To the OP (thats you Mazdabill):

-tell us what kind of turbo you have? Specs?
-what manifold are you using?
-what kind of intercooler setup did you purchase?
-what do you plan to use the car for?
-why do you think you need/want 500hp?


Once you give us some real info, and some sort of thought processing proof we can probably help. Also, SEARCH.

thanks!

mazdabill 05-04-08 11:36 AM

I'm very new to the rotary. For years, I've loved the idea, concept, look and every thing about the 3rd gen rx7. It is a dream car, for me. Eventually, I want it to be show room ready. Yes, it will be awhile, but I will not give up, I will have it. As far as the list goes, yes, I did paste some, but I researced all of the prices. So, there was a thought process. Anyway, I will get back to this post with all details of your questions. Yes, I know, I should already know this. And thanks, I'm grateful of your time and input

zack4173 05-04-08 02:51 PM


Originally Posted by mazdabill (Post 8157438)
Going single. I've made a list with prices. Hoping to get some advise on list. Do the prices look acurate? Recomondations for brands and were is the best place to get them? Should I have anything else? And what is fpr?

Upgrades for single turbo:

-Upgraded injectors$68 each 4 @$272
-upgraded pump$100
-ECU$150-1500, PFC$200, Microtech, Haltech, all work
-new fuel SYSTEM$90.1600 secondary 850 primary, fuel rails$50, fpr, line,
-boost controller$150
-upgraded clutch.$500-600
-Radiator, Koyo $360
-Exhaust upgrade$450-500
-Dual oil coolers $175-300
-Flywheel $260
-wideband o2 sensor/controller $290
-Ignition Kit $390
-Ignition Harness $40
-Wire plugs $70
-Spark Plugs $50
-Differential Bushings $200

Total: $3,797-$5,422

Alot of your prices seem off to me boost controllers new are around $300-400

Upgraded exhaust is $450-600 just for catback another $200-300 for downpipe and midpipe though

dual oil coolers are around $800 new i dont know about used

A good upgraded fuel pump would be $200 at least

Power FC is $700-1000

New fuel system lines injectors rails would be about $1000

So that changes the cost a little bit I would suggest you do more research on prices before you move to far ahead. Just my little bit of advice good luck with the project though.


All times are GMT -5. The time now is 12:17 AM.


© 2024 MH Sub I, LLC dba Internet Brands