RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   safe boost (https://www.rx7club.com/single-turbo-rx-7s-23/safe-boost-755109/)

Diablopaintballa 05-10-08 10:51 AM

safe boost
 
what is a safe amount of boost on a completely stock 91 '7???? im putting together a turbo kit for my '7 and i was jsut wondering how much boost i could push in it with stock internals w/o blowing the hell out of my 13b

ZAN_TUNING 05-10-08 10:59 AM

too many variables... one mainly being the tune.

safe? 2psi

safe? 13psi

safe? 20psi w/ race fuel

all could blow the fuck up tho with bad tuning :D

Diablopaintballa 05-10-08 11:06 AM

well im good with the tuning part, i learned how to tune on a 96 accord w/ 8 psi. im not looking for like 600rwhp but like close to 300 woul dbe fine with me. I have t3/t4 turbo for the 7 and i was thinking like 5 to 6 psi???? on stock internals.... cause i know the stock injectors are pretty good, soooo what do you think i should do???? wait to to build it and run like 15psi, or for right now jsut run like 5 or 6 on stock internals?

turbo_dave 05-10-08 11:30 AM

i ran 12 pounds on my stock turbo 2 with a t4,and stock computer with no problems.

Diablopaintballa 05-10-08 11:39 AM


Originally Posted by rotarydave2006 (Post 8178472)
i ran 12 pounds on my stock turbo 2 with a t4,and stock computer with no problems.

but with stock internals??? and im making an N/A into a turbo... is it different?

TweakGames 05-10-08 01:29 PM


Originally Posted by Diablopaintballa (Post 8178492)
but with stock internals??? and im making an N/A into a turbo... is it different?

haha you're going to have a blast. Document everything.

I recommend you really sit back, search and read the forums. It is not a stupid 96 honda engine by any means.

Diablopaintballa 05-10-08 03:16 PM


Originally Posted by TweakGames (Post 8178699)
haha you're going to have a blast. Document everything.

I recommend you really sit back, search and read the forums. It is not a stupid 96 honda engine by any means.

i meant the honda engine is been tuned...... im worried about the 7 right now. im real short on cash, but i can make some minor upgrades

ZAN_TUNING 05-11-08 03:05 AM

what are you planning on tuning with? honda engines require a good bit different timing all around and fuel requirements aren't the same either.

plus, you probably were using Crome (at best) which is nothing like any stand alone for the RX7's. then again if your planning to use stock ecu with something like an safc, well... i wish you the best. :)

arghx 05-11-08 07:49 AM

go into the 2nd gen subforum and read about a turbo n/a engine, you will find better info there for your proposed setup. In short, you are better off swapping in a turbo engine. And whatever Honda style T3/T4 you have is too small.

Diablopaintballa 05-11-08 08:55 AM

well i used a greddy e-manage, and i do know everything is different. and finally sombody pointing me in the right direction

WeaponRX7 05-11-08 09:07 AM

on a rx-7 0 psi is safe anything after that your looking at spending $$$$


All times are GMT -5. The time now is 04:07 PM.


© 2024 MH Sub I, LLC dba Internet Brands