Recommendations on a single E85 fuel pump for 600whp (13B-RE)
Hello Guys,
I'm looking for opinions/experiences on an E85 Fuel pump to pontetially replace my weathered dual -044 setup (which is a bit overkill anyway for the HP I'm at). I am concerned that the fuel pumps will fail soon (already had a couple of them stop working) and I would like to setup an in trunk surge tank. What single pump would work for 600whp and also be good for daily use (IE. reliable, not super noisy and not going to put excess heat into my fuel)? The car is daily driven during summer. Cheers! |
Originally Posted by ChrisRX8PR
(Post 11959055)
Hello Guys,
I'm looking for opinions/experiences on an E85 Fuel pump to pontetially replace my weathered dual -044 setup (which is a bit overkill anyway for the HP I'm at). I am concerned that the fuel pumps will fail soon (already had a couple of them stop working) and I would like to setup an in trunk surge tank. What single pump would work for 600whp and also be good for daily use (IE. reliable, not super noisy and not going to put excess heat into my fuel)? The car is daily driven during summer. Cheers! |
Originally Posted by Neutron
(Post 11959270)
I would do a FuelLabs 41402 with installation kit in a custom surge tank and 529 Series Electronic Fuel Pressure Regulators which will electronically add demand based speed control to 41402 pump. This would pretty much be the ultimate E85 single pump setup.
Eitherway I appreciate your input. Cheers! |
Originally Posted by ChrisRX8PR
(Post 11959397)
Those are amazing and beautiful components as well but just what you mentioned comes out to over $1k which is a bit excessive for what I'm trying to go for. I'm not trying to cut corners but I feel like there should be other options for considerably less than that.
Eitherway I appreciate your input. Cheers! |
a1000
|
Walbro 485 is made for Ethanol
|
Originally Posted by dkwasherexd
(Post 11960192)
a1000
|
Originally Posted by neit_jnf
(Post 11960657)
Walbro 485 is made for Ethanol
Chris |
Originally Posted by ChrisRX8PR
(Post 11961146)
That would be great except its an in-tank fuel pump... :/
Chris |
Originally Posted by neit_jnf
(Post 11961328)
And?
Any suggestions? |
Recommendations on a single E85 fuel pump for 600whp (13B-RE)
What about a surge tank with pumps mounted inside surge tank like AI make?proven product. turbo blown sells them
|
Originally Posted by Rotate86
(Post 11961560)
What about a surge tank with pumps mounted inside surge tank like AI make?proven product. turbo blown sells them
|
I was planning on going with a surge tank setup. My question was regarding 1 pump; what single pump could flow 600whp worth of E85 on a rotary that is not in-tank? At this point I am contemplating getting that In-Tank walbro and figuring out how to fit it inside an OEM pump assembly (others have failed so Im not too optimistic).
Anyone else? Thanks! |
Recommendations on a single E85 fuel pump for 600whp (13B-RE)
the e85 Walbro is probably the biggest mainstream single pump.anything else is going to need a speed controller or voltage booster.
you say you are going to run a surge tank then say you are going to adapt main tank cradle? |
Recommendations on a single E85 fuel pump for 600whp (13B-RE)
have just re read this. is this all for a rx8?
|
Originally Posted by Rotate86
(Post 11962461)
have just re read this. is this all for a rx8?
|
Recommendations on a single E85 fuel pump for 600whp (13B-RE)
wow that's one way to take it I guess.
mearly trying to help him work out a solution and my thinking was based on a rx7 and rx7 fueltank. as I do not know about the rx8 pump cradle I can not comment as to why certain pumps do not fit in cradle/factory rx8 tank. I only clicked when he said he couldn't make the Walbro work intank. is it not OK for me to have asked application? |
Would be nice to see ID's pump finally come to market. Would be a great solution. The one that had at PRI last year was tiny enough it could be an in tank solution for you.
ASNU had a brushless pump at PRI as well that was of similar 600 l/hr volume IIRC. They talked like it was available at the time but I can't find any info. FIC is their US distributor. Maybe give them a call and see what they have. |
Originally Posted by Rotate86
(Post 11962495)
wow that's one way to take it I guess.
mearly trying to help him work out a solution and my thinking was based on a rx7 and rx7 fueltank. as I do not know about the rx8 pump cradle I can not comment as to why certain pumps do not fit in cradle/factory rx8 tank. I only clicked when he said he couldn't make the Walbro work intank. is it not OK for me to have asked application? |
Originally Posted by Sammy Built
(Post 11960731)
That pump is shit. Ive had nothing but bad experience with them. :icon_tdow
It can be a a struggle finding a single, external option... |
I run an Aeromotive Eliminator. 1100 lp/h at 40psi. Good with ethanol too.
|
I have a surge tank with dual 044 in it for my e85 setup.
|
All times are GMT -5. The time now is 06:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands