|
Do you use the R-100 racing 10mm ????
im also running oem cables and seems to be running ok. |
I didn't have this issue till over 28psi, but the M&W in general has alot of noise interfearance so a nice set of 10mm can only help.
|
thanks Ernie for the plug wire referral...
Magnecor. after reading their site i am ditching my MSD wires for the R-100s. while i haven't had ignition problems i do have radio interference and as i turn the boost up my ECU might decide it isn't happy. considering the moderate cost of a custom made Magnecor wireset it is better to be infront of any interference problem. howard |
Originally Posted by thewird
(Post 10184989)
On a side note, do you know where these could be purchased off the shelf? I set up my coils so I can use stock sized wires. thewird http://www.wannaspeed.com/index.php?...roducts_id=332 |
Originally Posted by Dudemaaanownsanrx7
(Post 10185523)
thewird |
no problem
|
Yes ill be in for a set as well...
those on that website are the r-100 right??? cause they only say 10mm,and since i have my m&w coils in the stock position i don't think ill have the need of custom wires.... correct me if im wrong |
| All times are GMT -5. The time now is 09:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands