NEW system fuel for Fd help
 

I'm riding my new fuel system (CJM fuel rail 60mm), two injectors ID725 for the primary and two ID2000 for the secondary both 60-14, 4 boss adapter, otherwise I need to get it perfect the installed system, not if I need some grommet or separators oem?

It's not clear what your asking here. Could you rephrase your question?

I'll ride the following setup for the gas system:

- CJM Fuel Rail
- Two ID725 60-14
- Two ID2000 60-14
- Four Boss Adapter

I need something else to install this setup? No if you need a splitter or grommet of the original system

You will also need a fuel pressure regulator. I assume you're using OEM fuel lines with adapter fittings to connect the fuel lines to your rails?

Sure, I have my regulator aeromotive A1000 and -6AN lines, I want to know is whether the accessories they put complement the Injector installed, Appendix 4 elements:

-Primary Fuel Injector Diffuser (N3A2-13-C61)

-Lower Primary Fuel Injector Grommet (N3A1-13-257)

-Secondary Fuel Injector Diffuser (N3A1-13-C60)

-Lower Secondary Fuel Injector Grommet (NF01-13-257)

You can get rid of all the stock injector components. The bosses you were provided replace them.