RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   New E85 Record holder ? 709.9rwhp 32psi (https://www.rx7club.com/single-turbo-rx-7s-23/new-e85-record-holder-709-9rwhp-32psi-833684/)

turboR1 04-17-09 11:07 AM

New E85 Record holder ? 709.9rwhp 32psi
 
We put the car on the dyno again last night and did a few pulls after hooking up a manual boost controller which turned out to be crap and would fluctuate boost each run without making any changes. But it give us a good idea of what she is capable off once everything is all sorted out. Still had many issues so the car was never really taken to redline. Going to hook up my electronic boost control instead, fix a few things and hopefully hit the dyno again today so we can finally tune this thing.

Heres a few vids of yesterdays initial pulls we ended up with 709.9 rwhp at about 32psi last night but these are all preliminary runs so we will be expecting a bit more once its tuned and dialed in.

This puts this motor over 130+ dyno runs. all over 500hp.

http://www.youtube.com/watch?v=8LWfW...e=channel_page

http://www.youtube.com/watch?v=hRKz9...e=channel_page

i'll get some more vids this weekend and hopefully a track pass :) Stay tuned.

sk8world 04-17-09 11:24 AM

very nice!

crispeed 04-17-09 11:28 AM


Originally Posted by turboR1 (Post 9135780)
We put the car on the dyno again last night and did a few pulls after hooking up a manual boost controller which turned out to be crap and would fluctuate boost each run without making any changes. But it give us a good idea of what she is capable off once everything is all sorted out. Still had many issues so the car was never really taken to redline. Going to hook up my electronic boost control instead, fix a few things and hopefully hit the dyno again today so we can finally tune this thing.

Heres a few vids of yesterdays initial pulls we ended up with 709.9 rwhp at about 32psi last night but these are all preliminary runs so we will be expecting a bit more once its tuned and dialed in.

This puts this motor over 130+ dyno runs. all over 500hp.

http://www.youtube.com/watch?v=8LWfW...e=channel_page

http://www.youtube.com/watch?v=hRKz9...e=channel_page

i'll get some more vids this weekend and hopefully a track pass :) Stay tuned.


I demand proof of that 709.9 dyno pull!! :rlaugh:
Just kidding! :lol:
Congrats to everyone involved!
Can't wait to see the track times.
NYC has a new contender for the 'KING' :lol:

djseven 04-17-09 11:44 AM

This is still on the stock ported, non doweled and just factory static balanced engine, correct?

turboR1 04-17-09 12:06 PM


Originally Posted by crispeed (Post 9135840)
I demand proof of that 709.9 dyno pull!! :rlaugh:
Just kidding! :lol:
Congrats to everyone involved!
Can't wait to see the track times.
NYC has a new contender for the 'KING' :lol:

lol, it was only on 4 1000cc injectors too.

turboR1 04-17-09 12:13 PM


Originally Posted by djseven (Post 9135888)
This is still on the stock ported, non doweled and just factory static balanced engine, correct?

that is correct. Ive been told that this is also a record for a stock port fd motor. If anyone has any details on that please chime in

Viking War Hammer 04-17-09 12:23 PM

wow..... awesome

how much is c16 or q16 selling for now? $13/gallon?

and e85 is $1.69/gallon this morning

zinx 04-17-09 12:26 PM

Amazing numbers. Congrats!

PDViper77 04-17-09 12:38 PM

Wow, good job on getting into the 700+ WHP Club.

13B-RX3 04-17-09 01:09 PM

Congrats Anthony. Hats off to Enzo and yourself. Great job guys :icon_tup::icon_tup::icon_tup:

gusfd3s 04-17-09 01:41 PM

congrats!! can't wait to get mine back on the dyno :)

turboR1 04-17-09 01:47 PM

Thanks Allen, Cris and everyone else for the comments.

Im undecided on what will break first now. an axle, rear, tranny or motor cause its all stock. So stay tuned for the carnage :evilgrin:

crispeed 04-17-09 02:11 PM


Originally Posted by djseven (Post 9135888)
This is still on the stock ported, non doweled and just factory static balanced engine, correct?

One piece ecentric shaft also! :lol:



Originally Posted by turboR1 (Post 9135960)
lol, it was only on 4 1000cc injectors too.

Don't go there! :rlaugh:

Busted7 04-17-09 02:17 PM

Hats off to you guys thats amazing im wondering how it respondes at the track?

Keep us posted and good luck!:icon_tup:

BluRR 04-17-09 02:46 PM

Didnt' the black fd in the "other thread" make 720 or 900whp?:rolleyes:

silverfdturbo6port 04-17-09 03:05 PM

god damn!!!!!! what does the autronic do that the power fc does not??? my hat is off to you guys and your tuning abilities. how much power have you made on a power fc car?

jamespond24 04-17-09 03:09 PM

That's an amazing number out of a stock port. Congrats.

darkphantom 04-17-09 03:23 PM

damn on stock ports. thats insane. impresive #'s


BTW whats that S475 turbo, never heard of it!

Lasse wankel 04-17-09 03:25 PM

Very good numbers:icon_tup: But how is the area under curve? Would say that a good streetport have more ponnies there:scratch: At what rpm did the engine peak? Now Gus it's up to you...:lol:

/Lasse

siguy2k 04-17-09 05:03 PM

That is awesome!!! Very impressive!!

Viking War Hammer 04-17-09 06:28 PM

I'm suprised this thread hasn't blown up yet. This is a pretty amazing feat.

BluRR 04-17-09 06:31 PM

its old news some other guys did it already..

rx72c 04-17-09 06:36 PM

709 on a stock engine is Bloody unreal
Gives me hope that my engine will make some serious grunt.
My car goes on dyno very soon with factory ports. Ill let you know if i even come close:)

Rob XX 7 04-17-09 06:49 PM

makes you think all the horseshit people do to thier motors is a waste of time.

Its the tuning that makes the difference, not the parts thrown at the project- congrats guys.

Viking War Hammer 04-17-09 06:57 PM


Originally Posted by BluRR (Post 9137008)
its old news some other guys did it already..

who's made more hp on a 2 rotor with pump fuel? who's made more hp with e85 with a 2 rotor? who's made more hp on stock ports?

no, really....... serious question here


All times are GMT -5. The time now is 06:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands