Need info on compressor... garrett M27
 

i need some info on the compressor.. i couldnt find any myself

on the housing, it reads M27 BC1 A\R .60

im lead to believe it is a garrett, but could easily be wrong... anybody got any ideas?

Useless.
That just descibes the compressor housing.

You need to pop that off and measure the wheel diameters.


-Ted

your talking about the comp wheel right?

the I.D s 55mm and O.D is 70mm

Sounds like a T04B V-trim. It has 8 paired inducer blades right?


~Mike................

yup. im planning on using this for a hybrid.. any opinions?

it'll work fine, I've done pleanty of them with that compressor. Just make sure to port the heck outta the wastegate.

~Mike..........

i previously ported the wastegate, but may make it bigger (if possible)

what kind of power is it capable of?
and any tips on balancing the wheels? i dont have a turbo shop anywhere around here.

ok guys, i did some work here (finally got some time too). trim of comp wheel is 61.73. or just 61... a\r of the housing is .60. this is going on an S4 turbo. what kind of power can i get out of this thing? and what is the wheel comparable to? is it really a v-trim? i also found some compressor maps if theyre needed.