mushroom intake filter
I can't fit a normal intake filter on my turbo because there is not enough room there. And my turbos inlet is 4", where can i find a hks or some sort of knock off mushroom intake. I can only find 4.5 and 3. Right now i have nothing, so something is better then what i have now. Thanks Jay
|
http://store.yahoo.com/mauromotorsports/graikitun.html
GReddy Airnix 100mm |
thank you
|
You're welcome. Found it a little cheaper.
http://www.speedtechnique.com/greddy...m-p-16573.html You still might be able to find a knock off that is cheaper. I think the Blitz and HKS metal filters are fairly low profile as well. I've run into the same problem with my current setup. |
I have a HKS SMF and it work great.
|
I ordered my K&N from a local speed shop for about $45
4" ID tappered from about 5" to 4" And i think 6" long. Fits perfect on my turbo and doesn't rub anuthing in the engine bay. I get the part # and pix later |
it wont fit unless it is a mushroom. i ahve already tried the K and N
|
hmm.... do you have a pic of it? what turbo,manifold, instercooler are you running? And what is it rubbing on. with a regular (can style) filter mine would rub on the radiater hose. but sinse i got one that is smaller at the tip than the base, it fits with no problem of rubbing on anything(comes, close but doesn't touch)
|
FWIW here are a few shots of mine.
http://img432.imageshack.us/img432/9...03031np.th.jpg http://img241.imageshack.us/img241/9...03191om.th.jpg |
All you need is a peice of tube and a 4" coupler - just have the tube bend at 90 degrees so you can fit any air filter on there. It has to be a really short pipe, but thats what i did before. Now I use a mesh filter... I don't like the shroom filters... heard horror stories. But then again, unless your turbo has enough power to suck in kids off the street, you'll be alright.
|
All times are GMT -5. The time now is 01:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands