Just dropped my car off for a single upgrade!
Finally I have all the parts and money to complete my engine. I just dropped it off at Bonzai Racing in Indiana for a single turbo upgrade. Bonzai racing is going to put together a custom fuel system with 850/1600 injectors and supra fuel pump. The turbo is an A-Spec 500r with a 1.00, and will be on my stock port motor with 2mm seals. I am using a power fc, greddy bov, hks twin power, greddy type s boost controller, blitz fmic, N1 catback, high flow cat. I am pretty pumped, since I have had the turbo kit for a couple of months. Once it is done I will post some more stuff about it.
|
Good stuff :). Do you have any pics of the 500r kit?
|
Originally Posted by GoodfellaFD3S
Good stuff :). Do you have any pics of the 500r kit?
|
dude i saw your car today. was yours the red one with the body kit?. i also dropped my car off at banzai for a single turbo upgrade.
|
Do you have an estimate for Bonzai to do the conversion?
|
I think it's banzai with an 'a'.
|
Originally Posted by GoodfellaFD3S
I think it's banzai with an 'a'.
|
Originally Posted by AZ'sFastFD3S
nice post count rich got damn!!!!!!!!!
|
...and any idea on what sort of HP increase you'll receive?
|
Yeah it is Banzai racing. Yeah that was my car there. Are you the guy getting the rx6 turbo put on? That should be pretty fun for you! Hopefully I am a little above 400 rwhp. Even if I am not though, it will still feel a lot faster to me. I already had all the boltons and ran 14 psi sometimes. I am so f'in pumped up about my car, I can't wait to drive it.
|
Originally Posted by pjr
Do you have an estimate for Bonzai to do the conversion?
FMIC Install $300 - $400 Turbo Kit Install $400 - $500 Fuel Kit Install $150 - $200 Vac Simplification $200 - $350 Custom I/C Piping $100 - $300 Tuning $300 - $400 |
yea i was getting an rx6 kit put on but that is a story for another day. think im going with something a bit bigger now. just not sure what yet.
|
Good deal man,my car is at banzai now also, there just putting the raps on it . Its the black fc with the bomex kit,60 to 1 turbo .81 hot side,greedy r spec intercooler,they are also tuning my haltech e6k. Chris and elaine know there stuff and are good people.. Dont hesitate to let them work on your seven. Your gonna be blasting friend good on ya
Good day friends stealth |
If anyone wants pics so far they are on banzai's website. http://www.banzairacing.net/ go to gallery, the peter's vr and you are there.
|
congrats man. Only thing i can say is be very carefull. Single turbo is a whole new animal and 400 rwhp is no joke. I would suggest run off the wastegate on your turbo until you get really used to it, then turn it up gradually. Good luck and have fun!!!!
Adam |
Originally Posted by pwwatkins
If anyone wants pics so far they are on banzai's website. http://www.banzairacing.net/ go to gallery, the peter's vr and you are there.
|
Originally Posted by pwwatkins
If anyone wants pics so far they are on banzai's website. http://www.banzairacing.net/ go to gallery, the peter's vr and you are there.
|
Keep us posted.
|
There are a couple more pics up, and they said they will pry start taking stuff off my car today.
http://www.banzairacing.net/watkins_smp.htm |
Nice fd friend ,If you want to check my fc its in the turbo fc section josh f..will be picking it up thursday hoping for over 400 whp .. Banzai rocks
Stealth :icon_tup: |
1 Attachment(s)
there go the twins and rad
|
Originally Posted by pwwatkins
Finally I have all the parts and money to complete my engine. I just dropped it off at Bonzai Racing in Indiana for a single turbo upgrade. Bonzai racing is going to put together a custom fuel system with 850/1600 injectors and supra fuel pump. The turbo is an A-Spec 500r with a 1.00, and will be on my stock port motor with 2mm seals. I am using a power fc, greddy bov, hks twin power, greddy type s boost controller, blitz fmic, N1 catback, high flow cat. I am pretty pumped, since I have had the turbo kit for a couple of months. Once it is done I will post some more stuff about it.
|
Originally Posted by AMRAAM4
get rid of that hi-flow cat and put on an rx7store resonated midpipe. You're going to need he flow and you aren't going to pass emissions anyway with that hi-flow cat and single turbo LOL
|
hey do me a favor ask them what resistors they are running for the injectors... i cant get keith on the phone! so im stumped till i hear from him. thanks
|
1 Attachment(s)
update
|
All times are GMT -5. The time now is 12:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands