Hey everyone....ive been shopping around and i was wondering if anybody could help me out with purchasing an intercooler....im running a Garret t04b turbo on a 12a 1982 rx7......what is a good size for the intercooler.....and im talking about air to air.....also u might want to check my pics....do to the fact that i have a 3rd gen rx7 front end....thx...parker
raising arizona
01-09-05 09:14 AM
Cool! just when I thought I've seen everything :)
FMIC size? I don't think it needs to be HUGE. I have a 91 TII -T60-1 turbo with a Spearco 27 x 8 x 4 and it works great and the radiator still is able to do its thang
nopiston_racer
01-09-05 09:20 AM
ya that was my main question...is i dont want to block the air flow to my radiator and oil cooler....and i also didnt want to get a FMIC thats too wide and wont fit....i really wasnt worried about the actual size for cooling...mainly for mounting purposes....thanks parker
Evil Aviator
01-09-05 10:10 AM
Originally Posted by nopiston_racer
ya that was my main question...is i dont want to block the air flow to my radiator and oil cooler....and i also didnt want to get a FMIC thats too wide and wont fit....i really wasnt worried about the actual size for cooling...mainly for mounting purposes....thanks parker
With a custom design like this, you are going to need to take the measurements and decide on a setup on your own. I recommend making a cardboard mock-up of an intercooler, and then checking to make sure it fits before you spend big bucks on a real intercooler. Make sure you plan for the end tanks and plumbing. If this is a street car, I wouldn't recommend a Spearco intercooler thicker than 3.5". You may want to look into staggering the various heat exchangers. Rule of thumb is 1 square inch of inlet for each 4 square inches of heat exchanger core.
BTW, your radiator doesn't exactly look like a high-performance unit. The radiator has more of an effect on engine cooling than the intercooler. ;)
nopiston_racer
01-09-05 10:29 AM
nah the radiator is oem.....turbo isnt being installed until i get my 12a streetported and rebuilt.....not wasting it on this engine.....just trying to get some info and a thought on what to shop for in the coming months......also one quick question is should i stay carb'd or go FI....thats another thing ive yet to decide on....thanks parker