RX7Club.com - Mazda RX7 Forum - --Injector sizes Question?--

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)

- - --Injector sizes Question?-- (https://www.rx7club.com/single-turbo-rx-7s-23/injector-sizes-question-40224/)

wankawankel

12-20-01 09:19 PM

--Injector sizes Question?--

I have a two sets of stock injectors from a 93 FD. Two of them are short, and the other two are a little longer. Which ones are the 550's and which ones are the 850's?

JoeD	12-20-01 10:21 PM

the primaries are 550. secondaries are 850.

machinehead

12-20-01 10:32 PM

The 550's are longer, that's why you can't put the 850's on the primary location, they will leak fuel past the bottom o-ring and flood your car or make it run REALLY REALLY rich! I have tried....

waynespeed

12-20-01 11:10 PM

Quote:

Originally posted by machinehead
The 550's are longer, that's why you can't put the 850's on the primary location, they will leak fuel past the bottom o-ring and flood your car or make it run REALLY REALLY rich! I have tried....

They can work. All you need is a flat file and file the injector holder down a bit, try lowering the inside fuel feed grove a bit as well. ;)

This mod is only if you can control larger primaries.

wankawankel

12-21-01 08:14 AM

Since no one has the correct maps on the PFC for the 1600cc injector kit, I'm going for the 850 prim/1300 second combo. XS Engineering is supposed to have a great map to run that combo. What do you think? I may go Haltech and keep the 1600's. Carl...

All times are GMT -5. The time now is 08:11 PM.