I need a decent MAP (E6K)
 

Hi and Merry Christmas.
Seen as its Christmas please can someone help out.
I have a GT3540 set-up (0.7/0.84) on my 3rd gen. 550 and 1600cc injectors, standard engine with IC, Intake, fuel mods etc. Car is run with a Haltech E6K.
My map is bad and the car runs very rough. I have spent a fair bit of time trying to improve things but am not getting very far. The original base map was for a T-66 and has been modified.
Please can someone with a similar set-up share a map with me. I will send my map to anyone interested in looking at it.
Thanks and Merry Christmas
Martin

Martin, look at www.ricemobile.net and see if theres a map on there that can help you... I had the same problem as you, I eventually ended up doing it myself :( I got it to ran half decent now... But took shitloads of time!!!

Good luck mate

Thats where the T-66 map came from. I have been re reading some Hitman notes on timing set-up. I am wondering if its still out and also not helping. The map its self is still not good though (it probably was better before I started playing with it).
I will live in hope of a better map.

If you make a post in the Haltech forum, you might get some good replies.
Merry Christmas.

The hitman has some maps for a 60-1 that should work for you.

I have a great map, w/similar mods for 15psi, Only I have 720 primaries, and a SX RRFPR. The car runs better than stock in ALL conditions. The Turbo is a TO4S, making high 300s at 15psi. Perhaps hitman can help with the fuel map adjustment. Post your email and I'll send it to you. As always use at your own risk. Carl Byck

Hi, Thanks
I would appreciate looking at it. At least I can compare values in the maps if nothing more. The only maps available to look at are the few on Ricemobiles web site!
Many thanks
Martin
sintler@lineone.net

The map arrived, thanks. I will have a look at it later on.