Help!Did the single turbo upgrade now it won't run...........
 

Hi guys, I'm new to this board and also new to this type of cars(rotary).Anyways before I did the conversion the car quit running just started to misfire and finally quit,so I decide to do the single turbo upgrade(xs engineering)when I finished the install got the car running for about 20-30 min.and ran down the street and finally it quit running.I checked the wiring that connects to the coils and it was bad,no ground connections,fixed it and still won't run,it seems like it's not getting any ignition at this point I've check every posible symptoms that the manual is asking me to check maybe some of you guys might be able to help me.TIA


GIl

have u checked to see if the coils themselves are fried? that happened to me when it grounded out the trailing once. also, if you havent, check for blown fuses and other basic things

Checked the fuse,coils,plug wires and they checked out ok,I'm thinking that I should just buy the coil wiring harness,just to make sure.

Gil

Are you getting spark? Why would you want to purchase a harness? Is there something wrong with it? Most of the time, the connections are worn or have a less than ideal connection that needs attention. Check these things:

1. Spark
2. Connections are light and not frayed
3. Fuel delivery

hope this helps

Rick
1993 RX-7