guys with custom fuel systems: what fuel filter are you using.
I was planning to use the FRAM racing filter.
90 gph and 200 psi max pressure. With a Aeromotive m700 fuel pump. |
Im using the Aeromotive filter.
|
anybody, else
are you running a filter before and after the pump or just after. |
I really dont thin it matters. Im using a mazda filter
|
depends on how upgraded your fuel system is. if you're running -8 lines, you don't want to shove it all through the mazda filter.
|
I'm using a pair or Earls Filters
|
Kinsler Fuel Injection's "Paper BRL" fuel filter, has 10 micron disposable paper element.
There should be a filter before the fuel pump suction. In-tank pumps uses a sock type filter that attachs to the bottom of the pump and in-line pumps use an in-line type filter that is typically like a 40 micron, reusable filter. Jack |
My aeromotive pre-filter is 100micron, metal element.
|
i use 100 micron and 10 micron aeromotive filters....
|
cool, ill have to add a 100 micron filter before the pump
|
run a filter before and after
|
SX Engineering makes an AWESOME filter that is extremely high flowing. I believe it costs around $50 and has either a reusable lower filtering stainless element or a replacable higher filtering paper element. I can get these filters for you at a good price if you like it. Check out there website.
|
What is SX Engineering's website? For those with braided ss fuel lines what type of hose did you use and where did you source it? I want something with synthetic internal hose like silicon. Is the teflon lined hose a good idea? What is the best for the job?
|
there is a low pressure cheap fuel filter on summit for like $35.
8 an port, blue anodized. Does anyone see a problem using this pump. I already bought it so Im going to try it but what do you think??? http://store.summitracing.com/partde...art=FRM%2DHPG1 |
Automotive filter which recently caught a shit load of sand.. i think somebody tried to fuck me over.
|
I bought a stopck replacement from O'Reily. I tried blowing through it and it seams to flow plenty. When I updgrade to dual fuel pumps I will probably get a second filter. It cost something like $20. My friend has been running these on his 600 hp race car with no problems.
|
All times are GMT -5. The time now is 11:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands