Gt45 progress
1 Attachment(s)
well its official i need a different manifold....
|
What manifold r u running?
|
who runs A/C on a GT45-powered rotary? :)
Is the fitment issue just against the LIM? |
Originally Posted by ElCapoRx7
(Post 10543329)
What manifold r u running?
Originally Posted by Trots*88TII-AE*
(Post 10543396)
who runs A/C on a GT45-powered rotary? :)
Is the fitment issue just against the LIM? LIM and shock tower. along with a pinky gap between flanges. but the engine is also solid mount and sits lower then normal. im looking at getting long runner manifold |
that gt45 has a 68mm comp wheel. It looks bigger then it actually is
|
Progress Continues....
Ok well back on track. Got my engine out and on a stand. come to find out my passenger side motor mount was shot in which lowered that side. Replaced with a set of solid mounts. although i havent put engine back in yet (actually started stripping the bay down to get painted...:nod: ) also i got in on the definded vmount group buy and got that installed last night just to mock things up. (very well disigned and engineered kit) the only problem now is to get it all to fit. the kit is designed to be about an inch from the oem theromstat housing (dont have one anymore) and my new manifold sits about 6 inchs forward from that. Also my wastegate is in the front too. so it also will have conflict with my radiator hose, inlet and mounting. (that too will have to be either lowered or moved forward.) ill mock up my front bumper to see how much room i have to play with and or am able to trim) (also im getting a oem 99 bumper this weekend) im looking for some ideas and some input as to what and how i can get my vmount to work. i was thinking of cutting off the upper core support bar where the latch attaches and running a set of hood pins. then that runs in to not having the upper mounting locations for the vmount and front bumper. (can the front bumper just be able to mount and be secured by the fenders) the car is not my daily its more of a toy so occasional track and street use. thanks
|
dammit pics are too large... will post them as soon as i compress them....
|
alright here we go....
http://i241.photobucket.com/albums/f...ne82811059.jpg http://i241.photobucket.com/albums/f...ne82811067.jpg http://i241.photobucket.com/albums/f...ne82811063.jpg http://i241.photobucket.com/albums/f...ne82811061.jpg http://i241.photobucket.com/albums/f...ne82811057.jpg http://i241.photobucket.com/albums/f...ne82811069.jpg http://i241.photobucket.com/albums/f...ne82811070.jpg Now the mission is going to be to get my new vmount to fit http://i241.photobucket.com/albums/f...1iphone007.jpg |
Is that a Garrett gt45 or an ebay gt45? My Garrett 45r was stuffed into a 42r front cover. Maybe something you want to try? Makes a lot more room available.
|
california summers are mild compared to many other states. in vegas it's well over 100 for weeks at a time with spikes in humidity to boot. in florida it could be 85* but with 20% humidity you're sweating as soon as you leave your house. hell i almost miss the northern california valley sun, even when it was 118* in shade you could bet it would cool off in a day or 2 and it was always a total dry heat.
a/c mainly just causes problems on high horsepower rotaries, princess. it is a pressure cooker of an engine after all and they almost always have cooling issues without severe ducting modifications. |
GT45 w/ AC :egrin:
http://img64.imageshack.us/img64/770...6978303100.jpg Uploaded with ImageShack.us |
Where did you get the manifold from and for how much.
Thanks |
Contact Jdmfantasy for the manifold. Mine was a little more cause I got it with the synapse wg dump pipe and egt bungs.
|
geez man that things tight lika tiger :icon_tup::nod:
|
All times are GMT -5. The time now is 08:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands