Got my A-Spec AP-88 Kit today (pics)
Thread Starter
Joined: Mar 2003
Posts: 2,319
Likes: 32
From: South Jersey
Originally Posted by PDViper77
The guy that i bought my kit off of said he was running 850cc and 1600cc with my same turbo kit and he only had 1 nippondenso pump. He said he couldn't take it above 17psi because the Fuel pressure would drop from not having enough fuel so thats why i did a dual pump setup.
Your turbo is pretty big too so you might run out of fuel with just one pump.
Your turbo is pretty big too so you might run out of fuel with just one pump.
Got the car back this week and it drives great
. I'm keeping it below 4k, and no boost but I've boosted it a few times. So far I'm seeing 6 psi by 3k with the car untuned and even the boost controller is set to some random setting. I think I'll have no problem hitting full boost (15psi) by around 4k - 4.2k. Turbo sounds great too
.
Thread Starter
Joined: Mar 2003
Posts: 2,319
Likes: 32
From: South Jersey
Originally Posted by smg944
moehler what gear is that you are seeing 6psi by 3k rpms?
. As I break her in some more I'll do a few more tests with different gearing and speeds.
Originally Posted by BoostedRex
How long until you get it tuned? Glad to see that you're liking it so far. I'm really curious what numbers you'll come up with at 15psi. Best of luck bro!!
Zach
Zach
.I'll post some pics of it all cleaned up later today.
Joined: Feb 2002
Posts: 2,163
Likes: 2
From: RI
thats some real nice spool for a turbo that size. i am asking because i have an apex rx6 single right now and i am thinking of going bigger, but i want something that still spools decent. thanks for the info.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM




