Custom T90 Turbo Pics
I have a custom turbo built for very high hp motors. Bolts up to a T04 divided manifold, yet, runs a compressor side equivilent to a thumper turbo! Here are a few pics... anyone interested post in this thread, or pm me...https://www.rx7club.com/forum/attach...&postid=342875
|
Front view...
(the wheel is bigger than 2 inches, it just looks like that becuase its not against the tape meaure:D) https://www.rx7club.com/forum/attach...&postid=342880 |
|
Comparing it to your standard large t3/t4 (.60 compressor, and .63 exhaust)...
https://www.rx7club.com/forum/attach...&postid=342888 |
|
OMFG..... umm is that for a 7 second car ???? ;)
|
yeowzers! (sp?)
|
oh my bajesus!
that thing is monnnnnnnstrous. |
"i've seen biggerr pieces of corrn in my crrap!"
:D |
:ret: That's fuggin' huge!
|
I had it designed for a selected number of maniacs that we all know and love.:D
|
Originally posted by vosko OMFG..... umm is that for a 7 second car ???? ;) |
What's the size of the inducer/exducer of the compressor wheel?
crispeed 87TII 9.20@150mph |
Streetability
Can it be used on the street without NOS ? , and how much is it ?.
|
Re: Streetability
Originally posted by Marcel Burkett Can it be used on the street without NOS ? So what if it doesn't build up boost down low... they made millions of RX-7s that NEVER made boost. |
Re: Streetability
Originally posted by Marcel Burkett Can it be used on the street without NOS ? , and how much is it ?. |
NO BOOST DOWN LOW ?
Well I'm just tinking that it might not be worth the trouble for a street car if it can't deliver SOME low end boost on the street ,the "traffic light drag" would be over and lost by the time it finally spools and if I didn't want boost I wouldn't have bought a twin turbo third gen!!!!!!.;)
|
Re: Re: Streetability
Originally posted by Greg no way in hell! It is called the T90, it features compressor and turbines wheels similar to that of the T76. The wheels are slightly larger to accomodate for the extremely large housings that have been designed to support between 600 and 1200+hp!!! The housings are similar to the size of the Thumper series turbos from Turbonetics. It also has a divided tangential T04 bolt up exhaust flange so that it will fit most of the manifolds available. Here are some of the specs on it... Compressor- Inlet 5" Outlet 3" Inducer 3" Exducer 4.25" Turbine 10 blade Outlet 3.5" Wheel Diameters 2.75" and 3.25" The turbo will sell for $1800, it comes with a full warrentee and can actually be returned if you are not happy with it, as long as it is not blown. |
Re: Re: Re: Streetability
Originally posted by InitialD FC They are both pavement, whats the difference? :D It is called the T90, it features compressor and turbines wheels similar to that of the T76. The wheels are slightly larger to accomodate for the extremely large housings that have been designed to support between 600 and 1200+hp!!! The housings are similar to the size of the Thumper series turbos from Turbonetics. It also has a divided tangential T04 bolt up exhaust flange so that it will fit most of the manifolds available. Here are some of the specs on it... Compressor- Inlet 5" Outlet 3" Inducer 3" Exducer 4.25" Turbine 10 blade Outlet 3.5" Wheel Diameters 2.75" and 3.25" The turbo will sell for $1800, it comes with a full warrentee and can actually be returned if you are not happy with it, as long as it is not blown. |
$1800US?
You can get this turbo for $1800AUS! http://www.ajc13b.com/turbo-7.jpg These turbos are being used on everything from street cars to 8 second stormers such as this car! http://www.ajc13b.com/marty-2.jpg |
Re: Re: Re: Streetability
Originally posted by InitialD FC They are both pavement, whats the difference? :D It is called the T90, it features compressor and turbines wheels similar to that of the T76. The wheels are slightly larger to accomodate for the extremely large housings that have been designed to support between 600 and 1200+hp!!! The housings are similar to the size of the Thumper series turbos from Turbonetics. It also has a divided tangential T04 bolt up exhaust flange so that it will fit most of the manifolds available. Here are some of the specs on it... Compressor- Inlet 5" Outlet 3" Inducer 3" Exducer 4.25" Turbine 10 blade Outlet 3.5" Wheel Diameters 2.75" and 3.25" The turbo will sell for $1800, it comes with a full warrentee and can actually be returned if you are not happy with it, as long as it is not blown. I thought it had a bigger compressor wheel! Going by the specs you gave it's right on par with the T-51R-Kai The only difference would be that it has a much larger compressor housing. crispeed 87TII 9.20@150mph |
All times are GMT -5. The time now is 10:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands