Check out this carb HAT!
1 Attachment(s)
One off peice made by my friend Justice :)
its shown here on my build thread https://www.rx7club.com/build-thread...-950467/page7/ |
Very nice. I would be proud to pop the hood and show that bad boy off!!
|
Originally Posted by RW-7
(Post 11342487)
Very nice. I would be proud to pop the hood and show that bad boy off!!
That's a really cool piece. |
Thanks! this guy made it all from flat aluminum and used a band saw and a grinder !!!
|
SWEET!!! he could sell those pretty easy!!
|
nice design
|
Thanks guys! I can't wait to pop my hood with this under it:) Flow is not restricted by the design... see build thread for underside pics... also the rails were polished and the rail hold downs were fabricated from scratch by him. I love it
|
Thats one AWESOME piece of art :drool:
|
that is bad ass carb hat!!!
|
Thanks! We are all telling this guy he can make some money making aluminum stuff... he just does it mostly for fun...
|
Originally Posted by zaridar
(Post 11347266)
Thanks! We are all telling this guy he can make some money making aluminum stuff... he just does it mostly for fun...
|
Originally Posted by misterstyx69
(Post 11347465)
Tell him that he can have fun making money..If he builds more of those!
|
hes got to have so many hours into that piece that he'd have to charge quite a bit of money to actually make an average amount of money per hour if you will.. that is unless he were to find a place to cut pieces in bulk with a water jet or something. i have a place that does this if he's interested.
|
Very cool piece! It's great to see aesthetic pieces that are functional.
Is that a crack on the bottom side under the stationary gear? |
Originally Posted by XLR8
(Post 11349324)
Very cool piece! It's great to see aesthetic pieces that are functional.
Is that a crack on the bottom side under the stationary gear? |
Sweet!!!
|
I want one for the garage wall lol. Nice piece!
|
very cool indeed
|
Originally Posted by zaridar
(Post 11349886)
No sir.... just the edge of a weld bead:)
|
Thamks guys. Im very pleased... too bad I cannot take credit for the awesome work.. He is yapping in a bung underneat for iat sensor right now..
I know with its design another bend is added but hopefully that doesnt affect it much... |
Super sick looking, definitely an artist.
|
wasnt really fond of the almost 90° angle the the air enters at, which would cause me to use a 90° elbow coupler and then another 90°.. as it turns out it will not fit this way so he is reworking the entry pipe to come straight in... it should fit this way no prob... as a side benefit i will be losing two 90s° and only having a 45°! very excited....
he wasnt 100 percent what kind of room i had since he was not working on it with vehicle available!! this is also his first real automotive piece that is functional... he has since made a dual reservior for an old mustang with sight glasses for washer and antifreeze.. ill try to get pics... |
1 Attachment(s)
New and improved angle
|
Excellent work!!
|
All times are GMT -5. The time now is 02:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands