![]() |
I never get injector dutys over 85 percent so i guess the walbro is doing just fine, but when i go to meth and more boost i too will be getting the supra pump.
|
Originally Posted by catch-22
(Post 9490975)
Im running the H1E with full 4in exhaust dp on back with just a burns resonator. single walbro 550 1600 and make 410 to the ground and get full boost by 3500 ish. never see injector dutys over 85.
=Benjamin |
I run the 26cm internal wastegated housing that has the internal flapper welded shut. what port are you running first of all.
|
Originally Posted by catch-22
(Post 9496960)
I run the 26cm internal wastegated housing that has the internal flapper welded shut. what port are you running first of all.
Any idea? =Benjamin |
Originally Posted by apexFD
(Post 9497682)
Fully rebuilt, dynamically balanced LARGE street ported REW, TT pump, 850/1680cc KG fuel system, 3" intercooler piping with full 4" custom turbo back with dual synapse 40mm gates with this holset hx35 18.5cm externally gated housing.
Any idea? =Benjamin |
apexFD with your setup which is very similar to mine that turbine is going to be on the small side because of the large streetport. Sure it could work but it could choke at high rpm and create a ass load of heat. i would search for something just a tad bigger in T4 frame.
|
Oh, we are running meth/water injection as well.
=Benjamin |
That will definatly keep the EGTs down but i still think with the port your running its gonna choke up on you.
|
HX35 is really small for a large street ported REW...That's still T3 footprint right? You should move up to a holset HX40...I'm willing to bet you'll have great response and plenty of power to redline.
I'm going to be running the HX40 with a 19cm^2 hotside on an average streetported S4 13b...shooting for 400-450 rwhp @ 21 psi :D |
Originally Posted by SmogSUX
(Post 9498668)
HX35 is really small for a large street ported REW...That's still T3 footprint right? You should move up to a holset HX40...I'm willing to bet you'll have great response and plenty of power to redline.
I'm going to be running the HX40 with a 19cm^2 hotside on an average streetported S4 13b...shooting for 400-450 rwhp @ 21 psi :D |
We had a hard time finding an HX40 in decent shape, I wanted to get one because of the T4 footprint, but we are going to go with the HX35 for a while. We were looking for 400-450rwhp with good boost response. Will the torque be low with this turbo?
I will report back and let you know how it went. |
Here's my secret:
http://www.goldfarb-associates.com/goldfarb_site.htm Hit up this guy, who another member referred me to...I got a rebuilt/balanced HX40, with the 19cm^2 hotside, non wastegated too :O All for $536 shipped. Also his turbos he says he'll warranty for 1 year unlimited mileage if it's not for a performance application..so yeah...I'm putting mine on my...uhh Dodge? lol but seriously...CRAZY DEAL...just gotta watch his inventory..I almost bought a used HX40 from him, but was outbid at like $300 somethin...then the rebuilt one popped up and I jumped on it :D |
^ awesome deal, but if you wanna get a less than perfect holset rebuild kits are only 80 bucks!!!! Ive rebuilt mine twice and if you follow the holset manuals (which you can download from there website) its really easy.
|
I was going to do that but the only semi local shop to me (2 hours away) wanted $115 to balance everything :( then the used holset was $360, then the rebuild kit...lol if you find a killer deal on a used holset then go for it!
|
Originally Posted by SmogSUX
(Post 9499700)
Here's my secret:
http://www.goldfarb-associates.com/goldfarb_site.htm Hit up this guy, who another member referred me to...I got a rebuilt/balanced HX40, with the 19cm^2 hotside, non wastegated too :O All for $536 shipped. Also his turbos he says he'll warranty for 1 year unlimited mileage if it's not for a performance application..so yeah...I'm putting mine on my...uhh Dodge? lol but seriously...CRAZY DEAL...just gotta watch his inventory..I almost bought a used HX40 from him, but was outbid at like $300 somethin...then the rebuilt one popped up and I jumped on it :D |
^I think you're the one who told me about him lol
|
It seemed like I saw new hx40s on eBay for like $300, what's the deal with that? That's what I was looking at getting... Yay? Nay? Has anyone seen the hx40 on a 6 port turbo set up? I'm about to build my s4 and do a 6 port turbo set up, with 750p's and 1600s'... Any thoughts??
|
Better make sure it's not a counterfeit. There are a lot out there. Got my rebuilt Hx40 for $536 shipped from GoldFarb. He's an ebay vendor I believe that sells used/new/refurb's for fairly cheap.
|
Yeah, I talked to him, I'm not getting a hx40 super40 6 blade the a/r: 18 comp wheel 60mm turbine wheel 64mm for $550, I'll be running water/meth on a large streetported 6 port turbo s4, anyone have any idea when I should see full boost or just any thoughts on this set up?
|
^ now getting*
|
Idk about the 6 port turbo setup, but my S4 streetported TII saw 12 psi by 3800 rpm.
|
All times are GMT -5. The time now is 03:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands