AF61 Turbo owners
 

If you are running an AF61 Turbo please announce yourselves. I need some info. Thanks

do a search. there was a guy that compared the af61 to a gt40 and liked the af61 a hole lot more. Not sure what you need to know but I would do a search on it if I where you. good luck!

what info do you need?

I need to know what fiiting was used for the oil feed inlet line. The one that installs on the top of the center section of the turbo. I have no clue where to buy it or even the size. Can't get in contact with the guy who sold it to me.

Thanks

is the inlet hole threaded? It's mor than likely a 1/8th npt thread pitch and an use a 1/8npt to -4AN fitting and then you can fab up the rest of the oil feed line.

Did you buy the turbo directly from D&R? If so then this is truely a shocker......

Yes I did buy it from D&R. Why would it be a shocker???

Sarcasm

So would anyone know this??

Mine came with the fittings. I have no idea what size or where to buy it. Its a 90 deg bronze fitting.

Don't turn this into a "bash DR thread" guys. I won't have that. Things have finally calmed down here and the shit storm won't start again.

I agree whats the point of bashing??? Anyway If anybody else would know the thread size of the fitting I would greatly appriciate the help.

Thanks

the af61r is a borg warner turbo, the same one used on john deere applications. its big and makes big power.

i haven't seen any big power #'s posted yet.

I thought they where logging like 450 or so hp at like mid teen boost levels? Am I wrong?

1/8 inch NPT oil feed line.

pretty much the same as most other turbos....