adapter for stock FD oil feed hardline
 

what adapter does everyone use so they can use the stock FD oil feed hard line? i'm thinking its -4an to 1/8NPT male. i was thinking about just getting this, but 48 bucks seems expensive: http://himni-racing.com/index.php?ma...oducts_id=1191




i'm also wondering if a slightly modified T4 drain flange will bolt up to the FD front cover like it will on an FC. thanks guys

i actually like that line they make. very nice and clean install and works great :)

I got my kit from A-spec, but it was more or less the same.

i just had an a-spec one break :(

As I had to find it for myself in the winter of 2004 when installing my A-Spec
GT35R kit:

Earl's 9919BFH is a 14mm 1.5 pitch male to -4AN male adapter.
It can be used to attach an oil line directly to either the front side housing where the Mazda banjo bolt is, or to the end of the stock Mazda oil line.

It can do both because the 14mm male end also contains a female tapered compression fitting like the stock Mazda line from the turbo.

sweet. exactly what i was looking for, chuck. thanks