607rwhp FD
 

Q16 race gas, 24 psi large sideport/stud kit, balance etc

BW s475 T6 1.32

Had what appear to be some boost control signal issues, thats why its a littly wavy:blush:

nice

Good Number! Whats the max boost your planning to run? My old FD made 706whp @ 29psi with the borg warner s372/half bridged motor last month never came to life untill 25psi+ so looking forward to seeing you spool that beast!

ECU? nice #'s

Gonna go higher if time allows, plan was to max it out.

From 15 to 20psi gained 90rwhp, and 20 to 24psi it gained 80rwhp so it still cooking.

Haltech Platinum Sport 1000

Grats on the numbers must be a blast to drive. Whats with the wavy powerband though ?

Sick Numbers!! does it spit Hot fya!!

nice numbers! cant wait till u crank it up and see the results

Boost pressure wasn't steady, and therefore power isn't.

Car is pretty fast at current boost pressure. Smokes the tires in 1/2/3rd, 295 wide "semi" slicks...

Impressive! :icon_tup:

That turbo is moving some serious air. Nice work.

Are you controlling boost with the Haltech?

Profec B original... Looking to get some video monday...

Kinda tempts me to switch turbo setup.

Why not use the Haltech to control it?

Wow, very nice.

Elliot, we need a video of the beast.

Any more updates on this car.

I've got video of the car, just been busy. Car is currently under surgery to hit 800rwhp. E & J throttle body, bigger fuel system etc...

X2 on videos! Same turbo im going to be running only i got the 1.10a/r.

has it gone to the track yet? if so whats the trap speed.

May I ask you what Apex seals you've used on that engine? ALS, Goopy?

Thanks and REgards

Good numbers so far:). I'm slowly putting together a hbp bw s372 build and I'm sure I will be having some block prep taken care of by you along the way.

big turbo. I need to turn my billet 67 up to 30psi and see what it will make. should be around 700whp

good job:icon_tup:

Not yet. I do know it annihilated a 2010 ACR Viper on the freeway. Its running ALS apex seals.